PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 47753-1
47753-1 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BOSS,TURBINE ENGINE is a the manufacturer industrial component. Key specifications include end_item_identification: ACFT ENG TF33, general_characteristics_item_description: STEEL AMS 5613,0.350 MIN 0.370 MAX IN. OD,0.430 MIN 0.450 MAX IN.

W. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-051-6914, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
47753-1
NSN: 5340-00-051-6914
FSC: 5340
CAGE: 96214 — RAYTHEON COMPANY DBA RAYTHEON (USA)
SPECIFICATIONS
end_item_identificationACFT ENG TF33
general_characteristics_item_descriptionSTEEL AMS 5613,0.350 MIN 0.370 MAX IN. OD,0.430 MIN 0.450 MAX IN. W
NSN5340-00-051-6914
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 47753-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER BUTADIENE-STYRENE CLASS SBR
•
STYLE DESIGNATOR: DONUT TOP COUNTERBORED
•
OUTSIDE/TOP FLANGE DIAMETER: 0.625 INCHES NOMINAL IN
•
FIRST COUNTERBORE DIAMETER: 0.250 INCHES NOMINAL IN
•
FIRST COUNTERBORE DEPTH: 0.188 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.094 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER BUTADIENE-STYRENE CLASS SBR
STYLE DESIGNATORDONUT TOP COUNTERBORED
OUTSIDE/TOP FLANGE DIAMETER0.625 INCHES NOMINAL IN
OVERALL HEIGHT0.375 INCHES NOMINAL IN
FIRST COUNTERBORE DIAMETER0.250 INCHES NOMINAL IN
FIRST COUNTERBORE DEPTH0.188 INCHES NOMINAL IN
HOLE DIAMETER0.094 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
6026-7295-16Upgraded Successor
successor cross-reference
successor
Z00.N5106301007Upgraded Successor
successor cross-reference
successor
900859K1Upgraded Successor
successor cross-reference
successor
400054Interchangeable
interchangeable cross-reference
interchangeable
7A400054Interchangeable
interchangeable cross-reference
interchangeable
477531Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 47753-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 47753-1?
47753-1 is a BOSS,TURBINE ENGINE.
What parts can replace 47753-1?
There are 6 known substitutes for 47753-1: 6026-7295-16, Z00.N5106301007, 900859K1 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 47753-1?
47753-1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-051-6914. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 47753-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026