PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 9C-03044
9C-03044 ✓ Verified by PartsTable
— · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include seat_angle: 37.0 DEGREES FIRST END, temp_rating: -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF, thread_class: 3B FIRST END, connection_type: THREADED INTERNAL TUBE FIRST END, inside_diameter: 0.500 INCHES NOMINAL IN, connection_style: SWIVEL NUT FLARE FIRST END. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-01-240-8438, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9C-03044
NSN: 4720-01-240-8438
FSC: 4720
CAGE: 62934 — WAUSAU EQUIPMENT COMPANY LLC DBA SCHMIDT ENGINEERING & EQUIPMENT INC DIV WAUSAU EQUIPMENT LLC (USA)
SPECIFICATIONS
seat_angle37.0 DEGREES FIRST END
temp_rating-40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
thread_class3B FIRST END
connection_typeTHREADED INTERNAL TUBE FIRST END
inside_diameter0.500 INCHES NOMINAL IN
connection_styleSWIVEL NUT FLARE FIRST END
outside_diameter0.938 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
thread_directionRIGHT-HAND FIRST END
operating_pressure3500.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
burst_test_pressure14000.0 POUNDS PER SQUARE INCH LBS
nominal_thread_size0.750 INCHES FIRST END IN
end_connection_designSTRAIGHT FIRST END
NSN4720-01-240-8438
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: 9C-03044 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INSIDE DIAMETER: 0.500 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 0.938 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
•
LAYER COMPOSITION AND LOCATION: 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND 2ND LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND OUTER LAYER MOLDED RUBBER, SYNTHETIC
•
THREAD CLASS: 3B FIRST END
•
MINIMUM INSIDE BENDING RADIUS: 7.000 INCHES IN
•
CONNECTION STYLE: SWIVEL NUT FLARE FIRST END
•
BURST TEST PRESSURE: 14000.0 POUNDS PER SQUARE INCH LBS
TECHNICAL CHARACTERISTICS (FLIS)
INSIDE DIAMETER0.500 INCHES NOMINAL IN
OUTSIDE DIAMETER0.938 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
LAYER COMPOSITION AND LOCATION1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND 2ND LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND OUTER LAYER MOLDED RUBBER, SYNTHETIC
THREAD CLASS3B FIRST END
MINIMUM INSIDE BENDING RADIUS7.000 INCHES IN
CONNECTION STYLESWIVEL NUT FLARE FIRST END
END ITEM IDENTIFICATION2420-01-160-2754
BURST TEST PRESSURE14000.0 POUNDS PER SQUARE INCH LBS
CONNECTION TYPETHREADED INTERNAL TUBE FIRST END
END CONNECTION DESIGNSTRAIGHT FIRST END
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
SAE-J517-54-6Interchangeable
interchangeable cross-reference
interchangeable
SAE-J517Interchangeable
interchangeable cross-reference
interchangeable
301-6Interchangeable
interchangeable cross-reference
interchangeable
J517-100R2Interchangeable
interchangeable cross-reference
interchangeable
9C03639004Interchangeable
interchangeable cross-reference
interchangeable
9C-03043Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 9C-03044?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9C-03044?
9C-03044 is a HOSE ASSEMBLY,NONMETALLIC.
What parts can replace 9C-03044?
There are 6 known substitutes for 9C-03044: SAE-J517-54-6, SAE-J517, 301-6 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 9C-03044?
9C-03044 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-01-240-8438. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9C-03044

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026