PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 9BBT5722
9BBT5722 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The CUP,TAPERED ROLLER BEARING is a the manufacturer tape media or drive component used in enterprise backup, archival, and disaster recovery environments. Key specifications include material: STEEL OVERALL, overall_width: 1.8750 INCHES NOMINAL IN, outside_diameter: 5.5150 INCHES NOMINAL IN, style_designator: NORMAL ANGLE, backface_corner_radius: 0.1250 INCHES NOMINAL IN, standard_tolerance_designation: AFBMA CLASS 2. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-0499, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9BBT5722
NSN: 3110-00-100-0499
FSC: 3110
CAGE: 23382 — FWD SEAGRAVE HOLDINGS LP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
overall_width1.8750 INCHES NOMINAL IN
outside_diameter5.5150 INCHES NOMINAL IN
style_designatorNORMAL ANGLE
backface_corner_radius0.1250 INCHES NOMINAL IN
standard_tolerance_designationAFBMA CLASS 2
NSN3110-00-100-0499
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 9BBT5722 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
BACKFACE CORNER RADIUS: 0.1250 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
OUTSIDE DIAMETER: 5.5150 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NORMAL ANGLE
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
BACKFACE CORNER RADIUS0.1250 INCHES NOMINAL IN
OVERALL WIDTH1.8750 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
OUTSIDE DIAMETER5.5150 INCHES NOMINAL IN
STYLE DESIGNATORNORMAL ANGLE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
1971-0007Interchangeable
interchangeable cross-reference
interchangeable
RELEASE668Interchangeable
interchangeable cross-reference
interchangeable
14534Interchangeable
interchangeable cross-reference
interchangeable
P70013Interchangeable
interchangeable cross-reference
interchangeable
4670013-4Interchangeable
interchangeable cross-reference
interchangeable
5722Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 9BBT5722?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9BBT5722?
9BBT5722 is a CUP,TAPERED ROLLER BEARING.
What parts can replace 9BBT5722?
There are 12 known substitutes for 9BBT5722: 1971-0007, RELEASE668, 14534 and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 9BBT5722?
9BBT5722 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-0499. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9BBT5722

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026