PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 4670013-4
4670013-4 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include hole_diameter: 0.531 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 5.938 INCHES NOMINAL IN, aperture_width: 3.375 INCHES NOMINAL IN, overall_length: 7.875 INCHES NOMINAL IN, aperture_length: 3.375 INCHES NOMINAL IN, cross-sectional_thickness: 0.076 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-147-8598, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4670013-4
NSN: 5330-00-147-8598
FSC: 5330
CAGE: 6N299 — AGCO CORP PARTS OPN (USA)
SPECIFICATIONS
hole_diameter0.531 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width5.938 INCHES NOMINAL IN
aperture_width3.375 INCHES NOMINAL IN
overall_length7.875 INCHES NOMINAL IN
aperture_length3.375 INCHES NOMINAL IN
bolt_hole_quantity3
cross-sectional_thickness0.076 INCHES NOMINAL IN
NSN5330-00-147-8598
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 4670013-4 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
APERTURE WIDTH: 3.375 INCHES NOMINAL IN
•
APERTURE LENGTH: 3.375 INCHES NOMINAL IN
•
CROSS-SECTIONAL THICKNESS: 0.076 INCHES NOMINAL IN
•
BOLT HOLE QUANTITY: 3
•
HOLE DIAMETER: 0.531 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
TECHNICAL CHARACTERISTICS (FLIS)
APERTURE WIDTH3.375 INCHES NOMINAL IN
APERTURE LENGTH3.375 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS0.076 INCHES NOMINAL IN
OVERALL LENGTH7.875 INCHES NOMINAL IN
OVERALL WIDTH5.938 INCHES NOMINAL IN
BOLT HOLE QUANTITY3
HOLE DIAMETER0.531 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
1971-0007Interchangeable
interchangeable cross-reference
interchangeable
RELEASE668Interchangeable
interchangeable cross-reference
interchangeable
9110-2Interchangeable
interchangeable cross-reference
interchangeable
14534Interchangeable
interchangeable cross-reference
interchangeable
5722Interchangeable
interchangeable cross-reference
interchangeable
9BBT5722Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 4670013-4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4670013-4?
4670013-4 is a GASKET.
What parts can replace 4670013-4?
There are 10 known substitutes for 4670013-4: 1971-0007, RELEASE668, 9110-2 and 7 more. Substitute compatibility should be verified for your specific system.
Is 4670013-4 still available?
4670013-4 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4670013-4

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026