PartsTable
Technical Data Sheet
Download PDF

9953M93P06 — STUD,SHOULDERED

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

9953M93P06: STUD,SHOULDERED.

The STUD,SHOULDERED is a the manufacturer industrial component. Key specifications include material: NICKEL ALLOY, thread_class: 3A STUD THREAD A, thread_length: 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM NUT THREAD IN, overall_length: 1.880 INCHES NOMINAL IN, surface_finish: 125.0 MICROINCHES OVERALL, shoulder_length: 0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5307-01-214-6914, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9953M93P06
NSN: 5307-01-214-6914
FSC: 5307 — Studs
CAGE: 07482 — GENERAL ELECTRIC COMPANY (USA)
SPECIFICATIONS
materialNICKEL ALLOY
thread_class3A STUD THREAD A
thread_length0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM NUT THREAD IN
overall_length1.880 INCHES NOMINAL IN
surface_finish125.0 MICROINCHES OVERALL
shoulder_length0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
special_featuresSHOULDER IS D-SHAPED WITH CENTER TO FLAT 0.245-0.255 IN. IN
style_designatorSHOULDERED
thread_directionRIGHT-HAND NUT THREAD
shoulder_diameter0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM IN
nominal_thread_size0.250 INCHES NUT THREAD IN
nut_end_shank_length0.330 INCHES MINIMUM AND 0.350 INCHES MAXIMUM IN
NSN5307-01-214-6914
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 9953M93P06 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: 63.0 MICROINCHES SHOULDER BEARING SURFACE
•
NUT END SHANK DIAMETER: 0.280 INCHES MINIMUM AND 0.285 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM NUT THREAD IN
•
STYLE DESIGNATOR: SHOULDERED
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 7471 ASSN STD SINGLE MATERIAL RESPONSE
TECHNICAL CHARACTERISTICS
SURFACE FINISH63.0 MICROINCHES SHOULDER BEARING SURFACE
SURFACE FINISH125.0 MICROINCHES OVERALL
NUT END SHANK DIAMETER0.280 INCHES MINIMUM AND 0.285 INCHES MAXIMUM IN
THREAD LENGTH0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM NUT THREAD IN
THREAD LENGTH0.670 INCHES MINIMUM AND 0.690 INCHES MAXIMUM STUD THREAD IN
STYLE DESIGNATORSHOULDERED
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 7471 ASSN STD SINGLE MATERIAL RESPONSE
OVERALL LENGTH1.880 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND STUD THREAD
THREAD DIRECTIONRIGHT-HAND NUT THREAD
SUBSTITUTES & CROSS-REFERENCES 3
9953M93P02Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
9953M93Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
JH410Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 9953M93P06?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9953M93P06?
9953M93P06 is a STUD,SHOULDERED.
What parts can replace 9953M93P06?
There are 3 known substitutes for 9953M93P06: 9953M93P02, 9953M93, JH410. Substitute compatibility should be verified for your specific system.
What is the NSN for 9953M93P06?
9953M93P06 is cataloged in the U.S. Government catalog under NSN 5307-01-214-6914. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9953M93P06

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.