PartsTable
Technical Data Sheet
Download PDF

JH410 — NUT,SLEEVE

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

JH410: NUT,SLEEVE.

The NUT,SLEEVE is a the manufacturer industrial component. Key specifications include material: NICKEL ALLOY, nut_style: SLEEVE, nut_length: 0.156 INCHES NOMINAL IN, nut_diameter: 0.185 INCHES NOMINAL IN, thread_class: 3A STUD THREAD A, thread_length: 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM NUT THREAD IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-487-5394, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
JH410
NSN: 5310-00-487-5394
NIINs: 004875394, 012146914
FSC: 5310 — Nuts and Washers
CAGE: 86887 — SIGMA TEK, INC. (USA)
SPECIFICATIONS
materialNICKEL ALLOY
nut_styleSLEEVE
nut_length0.156 INCHES NOMINAL IN
nut_diameter0.185 INCHES NOMINAL IN
thread_class3A STUD THREAD A
thread_length0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM NUT THREAD IN
thread_seriesUNF
overall_length1.880 INCHES NOMINAL IN
surface_finish63.0 MICROINCHES SHOULDER BEARING SURFACE
shoulder_length0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
flange_thickness0.096 INCHES NOMINAL IN
special_featuresSHOULDER IS D-SHAPED WITH CENTER TO FLAT 0.245-0.255 IN. IN
NSN5310-00-487-5394
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: JH410 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLANGE WIDTH ACROSS FLATS: 0.375 INCHES NOMINAL IN
•
NUT LENGTH: 0.156 INCHES NOMINAL IN
•
FLANGE THICKNESS: 0.096 INCHES NOMINAL IN
•
THREAD SERIES: UNF
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.112 INCHES IN
•
NUT DIAMETER: 0.185 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE: HEXAGONAL FLANGE
TECHNICAL CHARACTERISTICS
FLANGE WIDTH ACROSS FLATS0.375 INCHES NOMINAL IN
NUT LENGTH0.156 INCHES NOMINAL IN
FLANGE THICKNESS0.096 INCHES NOMINAL IN
THREAD SERIESUNF
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.112 INCHES IN
NUT DIAMETER0.185 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPEHEXAGONAL FLANGE
SPECIAL FEATURES0.062 IN. W BY 0.062 IN. DEEP SLOT ON ONE FLAT OF FLANGE IN
NUT STYLESLEEVE
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required
Ready to buy JH410?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is JH410?
JH410 is a NUT,SLEEVE.
What is the NSN for JH410?
JH410 is cataloged in the U.S. Government catalog under NSN 5310-00-487-5394. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — JH410

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.