PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 9883528
9883528 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.406 INCHES MINIMUM AND 0.437 INCHES MAXIMUM IN, material: STEEL COMP 1010 BAND, overall_width: 0.500 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN, special_features: LOWER TONGUE HOLE SLOTTED 0.406 IN. MIN 0.437 IN.

MAX WIDTH,0.469 IN. MIN 0.625 IN. MAX LENGTH IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED.

This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-988-3528, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9883528
NSN: 5340-00-988-3528
FSC: 5340
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
diameter0.406 INCHES MINIMUM AND 0.437 INCHES MAXIMUM IN
materialSTEEL COMP 1010 BAND
overall_width0.500 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
special_featuresLOWER TONGUE HOLE SLOTTED 0.406 IN. MIN 0.437 IN. MAX WIDTH,0.469 IN. MIN 0.625 IN. MAX LENGTH IN
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
material_thickness0.025 INCHES NOMINAL IN
loop_inside_diameter0.562 INCHES NOMINAL IN
material_document_and_classificationCOMP C1010 ASSN STD SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end1.140 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.593 INCHES MINIMUM AND 0.969 INCHES MAXIMUM IN
NSN5340-00-988-3528
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 9883528 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DIAMETER: 0.406 INCHES MINIMUM AND 0.437 INCHES MAXIMUM IN
•
LOOP INSIDE DIAMETER: 0.562 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SINGLE LOOP
•
MATERIAL: STEEL COMP 1010 BAND
•
MATERIAL DOCUMENT AND CLASSIFICATION: COMP C1010 ASSN STD SINGLE MATERIAL RESPONSE BAND
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
TECHNICAL CHARACTERISTICS (FLIS)
DIAMETER0.406 INCHES MINIMUM AND 0.437 INCHES MAXIMUM IN
OVERALL WIDTH0.500 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
LOOP INSIDE DIAMETER0.562 INCHES NOMINAL IN
STYLE DESIGNATORSINGLE LOOP
MATERIALSTEEL COMP 1010 BAND
MATERIAL DOCUMENT AND CLASSIFICATIONCOMP C1010 ASSN STD SINGLE MATERIAL RESPONSE BAND
MATERIALPLASTIC POLYVINYL CHLORIDE (PVC) OR RUBBER CHLOROPRENE CUSHION
TONGUE HOLE TYPEROUND, UNTHREADED
SPECIAL FEATURESLOWER TONGUE HOLE SLOTTED 0.406 IN. MIN 0.437 IN. MAX WIDTH,0.469 IN. MIN 0.625 IN. MAX LENGTH IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.593 INCHES MINIMUM AND 0.969 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
VB8-1DA9-3Interchangeable
interchangeable cross-reference
interchangeable
11334-1Interchangeable
interchangeable cross-reference
interchangeable
25704-281242-06-0Interchangeable
interchangeable cross-reference
interchangeable
103341Interchangeable
interchangeable cross-reference
interchangeable
2552Interchangeable
interchangeable cross-reference
interchangeable
MT2413ALD2Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 9883528?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9883528?
9883528 is a CLAMP,LOOP.
What parts can replace 9883528?
There are 8 known substitutes for 9883528: VB8-1DA9-3, 11334-1, 25704-281242-06-0 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 9883528?
9883528 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-988-3528. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9883528

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026