PartsTable
Technical Data Sheet
Download PDF

103341 — CABLE ASSEMBLY,SPECIAL PURPOSE,E

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

103341: CABLE ASSEMBLY,SPECIAL PURPOSE,E.

CABLE ASSEMBLY,SPECIAL PURPOSE,E. Key specifications include material: PLASTIC OVERALL, offset_height: 0.810 INCHES NOMINAL IN, overall_width: 2.880 INCHES NOMINAL IN, head_thickness: 1.060 INCHES NOMINAL IN, overall_length: 10.030 INCHES NOMINAL IN, inside_diameter: 2.120 INCHES MINIMUM AND 2.380 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-080-6004, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
103341
NSN: 5310-00-080-6004
NIINs: 000806004, 001609673, 001867448, 002311746, 005599465, 009203445, 010199564, 010357365, 010358605
FSC: 5310 — Nuts and Washers
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialPLASTIC OVERALL
offset_height0.810 INCHES NOMINAL IN
overall_width2.880 INCHES NOMINAL IN
head_thickness1.060 INCHES NOMINAL IN
overall_length10.030 INCHES NOMINAL IN
inside_diameter2.120 INCHES MINIMUM AND 2.380 INCHES MAXIMUM IN
outside_diameter2.560 INCHES NOMINAL IN
special_featuresCUSHION MATERIAL SHALL BE RESISTANT TO HYDRAULIC FLUID PER MIL-H-5606 /PER AN8031-6 OR BAC 1521-242/
style_designatorDOUBLE OFFSET SINGLE HEAD
fastening_device_typeSELF-LOCKING HEXAGON NUT
wrenching_surface_size1.605 INCHES NOMINAL FIRST END IN
end_item_identification6115001181241,6115001181244,6115001181245
NSN5310-00-080-6004
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 103341 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
TYPICAL APPLICATIONS
  • Server Internal Cabling
  • Data Center Cable Infrastructure
  • SAS/SATA Drive Connectivity
SUBSTITUTES & CROSS-REFERENCES 10
120394Reference document
Same NSN cross-reference
Reference document — Secondary reference
1176J92-19Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
9438083Reference document
Same NSN cross-reference
Reference document — Secondary reference
410060135Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LS1091391-15Reference document
Same NSN cross-reference
Reference document — Secondary reference
32102Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 103341?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 103341?
103341 is a CABLE ASSEMBLY,SPECIAL PURPOSE,E.
What parts can replace 103341?
There are 10 known substitutes for 103341: 120394, 1176J92-19, 9438083 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 103341?
103341 is cataloged in the U.S. Government catalog under NSN 5310-00-080-6004. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 103341