Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The RETAINER,PACKING is a the manufacturer industrial component. Key specifications include angle: 25.0 DEGREES MINIMUM AND 35.0 DEGREES MAXIMUM, material: PLASTIC TETRAFLUOROETHYLENE OVERALL, joint_type: SCARF-BUTT RETAINER, peripheral_diameter: 5.849 INCHES MINIMUM AND 5.853 INCHES MAXIMUM IN, center_hole_diameter: 5.375 INCHES NOMINAL IN, distance_between_ends: 0.188 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-171-9224, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
982231
NSN:5330-00-171-9224 FSC:5330 CAGE:F6137 — SAFRAN LANDING SYSTEMS (FRA)
SPECIFICATIONS
angle
25.0 DEGREES MINIMUM AND 35.0 DEGREES MAXIMUM
material
PLASTIC TETRAFLUOROETHYLENE OVERALL
joint_type
SCARF-BUTT RETAINER
peripheral_diameter
5.849 INCHES MINIMUM AND 5.853 INCHES MAXIMUM IN
center_hole_diameter
5.375 INCHES NOMINAL IN
distance_between_ends
0.188 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
cross-sectional_height
0.138 INCHES MINIMUM AND 0.156 INCHES MAXIMUM IN
cross-sectional_thickness
0.046 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN
cross-sectional_shape_style
SQUARE
material_document_and_classification
MIL-R-8791 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN
5330-00-171-9224
COMPONENT DIAGRAM
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.138 INCHES MINIMUM AND 0.156 INCHES MAXIMUM IN
•
DISTANCE BETWEEN ENDS: 0.188 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
•
MATERIAL: PLASTIC TETRAFLUOROETHYLENE OVERALL
•
CENTER HOLE DIAMETER: 5.375 INCHES NOMINAL IN
•
CROSS-SECTIONAL THICKNESS: 0.046 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE STYLE: SQUARE
•
PERIPHERAL DIAMETER: 5.849 INCHES MINIMUM AND 5.853 INCHES MAXIMUM IN
•
ANGLE: 25.0 DEGREES MINIMUM AND 35.0 DEGREES MAXIMUM
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT
0.138 INCHES MINIMUM AND 0.156 INCHES MAXIMUM IN
DISTANCE BETWEEN ENDS
0.188 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
MATERIAL
PLASTIC TETRAFLUOROETHYLENE OVERALL
CENTER HOLE DIAMETER
5.375 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS
0.046 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLE
SQUARE
PERIPHERAL DIAMETER
5.849 INCHES MINIMUM AND 5.853 INCHES MAXIMUM IN
ANGLE
25.0 DEGREES MINIMUM AND 35.0 DEGREES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION
MIL-R-8791 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL