PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5162303
5162303 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.360 INCHES MINIMUM AND 0.422 INCHES MAXIMUM IN, material: STEEL BAND, overall_width: 0.969 INCHES MINIMUM AND 1.031 INCHES MAXIMUM IN, special_features: 0.500 IN. RADIUS ON TONGUE END IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED.

This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-264-9530, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5162303
NSN: 5340-00-264-9530
FSC: 5340
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
diameter0.360 INCHES MINIMUM AND 0.422 INCHES MAXIMUM IN
materialSTEEL BAND
overall_width0.969 INCHES MINIMUM AND 1.031 INCHES MAXIMUM IN
special_features0.500 IN. RADIUS ON TONGUE END IN
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
material_thickness0.032 INCHES MINIMUM AND 0.094 INCHES MAXIMUM IN
loop_inside_diameter1.032 INCHES MINIMUM AND 1.094 INCHES MAXIMUM IN
distance_from_loop_center_to_tongue_end1.469 INCHES MINIMUM AND 1.531 INCHES MAXIMUM IN
center_to_center_distance_between_loop_and_mounting_hole0.969 INCHES MINIMUM AND 1.031 INCHES MAXIMUM IN
NSN5340-00-264-9530
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5162303 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: SINGLE LOOP
•
MATERIAL THICKNESS: 0.032 INCHES MINIMUM AND 0.094 INCHES MAXIMUM IN
•
MATERIAL: STEEL BAND
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.469 INCHES MINIMUM AND 1.531 INCHES MAXIMUM IN
•
LOOP INSIDE DIAMETER: 1.032 INCHES MINIMUM AND 1.094 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH0.969 INCHES MINIMUM AND 1.031 INCHES MAXIMUM IN
STYLE DESIGNATORSINGLE LOOP
MATERIAL THICKNESS0.032 INCHES MINIMUM AND 0.094 INCHES MAXIMUM IN
MATERIALSTEEL BAND
TONGUE HOLE TYPEROUND, UNTHREADED
SPECIAL FEATURES0.500 IN. RADIUS ON TONGUE END IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.469 INCHES MINIMUM AND 1.531 INCHES MAXIMUM IN
LOOP INSIDE DIAMETER1.032 INCHES MINIMUM AND 1.094 INCHES MAXIMUM IN
DIAMETER0.360 INCHES MINIMUM AND 0.422 INCHES MAXIMUM IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.969 INCHES MINIMUM AND 1.031 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
203186Interchangeable
interchangeable cross-reference
interchangeable
982231Interchangeable
interchangeable cross-reference
interchangeable
MS28782-59Interchangeable
interchangeable cross-reference
interchangeable
B46-2Interchangeable
interchangeable cross-reference
interchangeable
MILB5687Interchangeable
interchangeable cross-reference
interchangeable
3159646-7Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5162303?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5162303?
5162303 is a CLAMP,LOOP.
What parts can replace 5162303?
There are 8 known substitutes for 5162303: 203186, 982231, MS28782-59 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5162303?
5162303 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-264-9530. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5162303

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026