PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 974344
974344 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING WITH RETAINER is a the manufacturer industrial component. Key specifications include material: STEEL RETAINER, construction: ONE-PIECE, outside_diameter: 1.062 INCHES NOMINAL IN, surface_treatment: CADMIUM RETAINER, retainer_thickness: 0.075 INCHES NOMINAL IN, packing_inside_diameter: 0.665 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-515-5549, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
974344
NSN: 5330-00-515-5549
FSC: 5330
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
materialSTEEL RETAINER
constructionONE-PIECE
outside_diameter1.062 INCHES NOMINAL IN
surface_treatmentCADMIUM RETAINER
retainer_thickness0.075 INCHES NOMINAL IN
packing_inside_diameter0.665 INCHES NOMINAL IN
NSN5330-00-515-5549
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 974344 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT: CADMIUM RETAINER
•
MATERIAL: RUBBER SYNTHETIC PACKING
•
OUTSIDE DIAMETER: 1.062 INCHES NOMINAL IN
•
PACKING INSIDE DIAMETER: 0.665 INCHES NOMINAL IN
•
CONSTRUCTION: ONE-PIECE
•
RETAINER THICKNESS: 0.075 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE TREATMENTCADMIUM RETAINER
MATERIALRUBBER SYNTHETIC PACKING
OUTSIDE DIAMETER1.062 INCHES NOMINAL IN
PACKING INSIDE DIAMETER0.665 INCHES NOMINAL IN
CONSTRUCTIONONE-PIECE
RETAINER THICKNESS0.075 INCHES NOMINAL IN
MATERIALSTEEL RETAINER
VERIFIED SUBSTITUTES & CROSS-REFERENCES 29
11058Interchangeable
interchangeable cross-reference
interchangeable
SY1060181Interchangeable
interchangeable cross-reference
interchangeable
C12204Interchangeable
interchangeable cross-reference
interchangeable
53140Interchangeable
interchangeable cross-reference
interchangeable
42-10174Interchangeable
interchangeable cross-reference
interchangeable
86553R11Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 974344?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 974344?
974344 is a PACKING WITH RETAINER.
What parts can replace 974344?
There are 29 known substitutes for 974344: 11058, SY1060181, C12204 and 26 more. Substitute compatibility should be verified for your specific system.
Is 974344 still available?
974344 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 974344

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026