C12204 — CIRCUIT CARD ASSEMBLY

✓ Government record, cited

— · NETWORK · 10GBE_NIC

PRODUCT OVERVIEW

C12204: CIRCUIT CARD ASSEMBLY.

The CIRCUIT CARD ASSEMBLY is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, point_type: CONVENTIONAL, point_angle: 118.0 DEGREES NOMINAL, shank_style: STANDARD TAPER W/TANG, flute_length: 4.875 INCHES NOMINAL IN, overall_length: 8.750 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5133-00-228-1327, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

NETWORK→ 10GBE_NIC→ C12204

NSN: 5133-00-228-1327
NIINs: 002281327, 010924174
FSC: 5133 — Drill Bits, Counterbores, and Countersinks: Hand and Machine
CAGE: 60NQ9 — GREENFIELD INDUSTRIES INC (USA)

SPECIFICATIONS

material	STEEL OVERALL
point_type	CONVENTIONAL
point_angle	118.0 DEGREES NOMINAL
shank_style	STANDARD TAPER W/TANG
flute_length	4.875 INCHES NOMINAL IN
flute_quantity	2
overall_length	8.750 INCHES NOMINAL IN
special_features	TAPER SHANK LG; FRACTIONAL SIZE 5/8
cutting_end_style	GENERAL PURPOSE
nominal_cutting_diameter	0.6250 INCHES IN
cutting_rotation_direction	RIGHT-HAND
specification/standard_data	05047-ASME B94.11M PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
NSN	5133-00-228-1327

COMPONENT DIAGRAM

KEY FEATURES

•

CUTTING END STYLE: GENERAL PURPOSE

•

TAPER SHANK SIZE DESIGNATOR: 2 MORSE

•

FLUTE LENGTH: 4.875 INCHES NOMINAL IN

•

NOMINAL CUTTING DIAMETER: 0.6250 INCHES IN

•

CUTTING ROTATION DIRECTION: RIGHT-HAND

•

SPECIFICATION/STANDARD DATA: 05047-ASME B94.11M PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD

•

SHANK STYLE: STANDARD TAPER W/TANG

TECHNICAL CHARACTERISTICS

CUTTING END STYLE	GENERAL PURPOSE
TAPER SHANK SIZE DESIGNATOR	2 MORSE
FLUTE LENGTH	4.875 INCHES NOMINAL IN
OVERALL LENGTH	8.750 INCHES NOMINAL IN
NOMINAL CUTTING DIAMETER	0.6250 INCHES IN
CUTTING ROTATION DIRECTION	RIGHT-HAND
SPECIFICATION/STANDARD DATA	05047-ASME B94.11M PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SHANK STYLE	STANDARD TAPER W/TANG
FLUTE QUANTITY	2
SPECIAL FEATURES	TAPER SHANK LG; FRACTIONAL SIZE 5/8

SUBSTITUTES & CROSS-REFERENCES 9

53140Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

42-10174Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

41140Reference document

Same NSN cross-reference

Reference document — Secondary reference

10040Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

B94.11MReference document

Same NSN cross-reference

Reference document — Design control — primary reference

209Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

No demilitarization required

Ready to buy C12204?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is C12204?

C12204 is a CIRCUIT CARD ASSEMBLY. It is classified as a NETWORK (10GBE_NIC).

What parts can replace C12204?

There are 9 known substitutes for C12204: 53140, 42-10174, 41140 and 6 more. Substitute compatibility should be verified for your specific system.

What is the NSN for C12204?

C12204 is cataloged in the U.S. Government catalog under NSN 5133-00-228-1327. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

C12204 — CIRCUIT CARD ASSEMBLY

Request a Quote — C12204