PartsTable
Technical Data Sheet
Download PDF

9725M84P08 — BEARING,BALL,THRUST

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

9725M84P08: BEARING,BALL,THRUST.

The BEARING,BALL,THRUST is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4340 CAGE, alignment_type: RIGID, overall_height: 0.6249 INCHES MINIMUM AND 0.6299 INCHES MAXIMUM IN, surface_finish: GROUND, special_features: INNER RING IS SPLIT;CAGE SILVER PLATED 0.0005-0.0015 THK PER AMS 2412, style_designator: GROOVED RACE SURFACE, BANDED OD. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-187-9085, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9725M84P08
NSN: 3110-01-187-9085
NIINs: 011879085, 013239228
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 38443 — SKF USA INC. (USA)
SPECIFICATIONS
materialSTEEL COMP 4340 CAGE
alignment_typeRIGID
overall_height0.6249 INCHES MINIMUM AND 0.6299 INCHES MAXIMUM IN
surface_finishGROUND
special_featuresINNER RING IS SPLIT;CAGE SILVER PLATED 0.0005-0.0015 THK PER AMS 2412
style_designatorGROOVED RACE SURFACE, BANDED OD
largest_bore_diameter1.7715 INCHES MINIMUM AND 1.7717 INCHES MAXIMUM IN
bore_smallest_diameter1.7715 INCHES MINIMUM AND 1.7717 INCHES MAXIMUM IN
end_item_identificationF118 ENGINE QUALIFIED
overall_outside_diameter2.9525 INCHES MINIMUM AND 2.9528 INCHES MAXIMUM IN
retainer_fabrication_methodMACHINED
standard_tolerance_designationABEC NO.5
NSN3110-01-187-9085
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 9725M84P08 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: MACHINED
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: GROOVED RACE SURFACE, BANDED OD
•
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
•
OVERALL OUTSIDE DIAMETER: 2.9525 INCHES MINIMUM AND 2.9528 INCHES MAXIMUM IN
•
BORE SMALLEST DIAMETER: 1.7715 INCHES MINIMUM AND 1.7717 INCHES MAXIMUM IN
•
ALIGNMENT TYPE: RIGID
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODMACHINED
OVERALL HEIGHT0.6249 INCHES MINIMUM AND 0.6299 INCHES MAXIMUM IN
SURFACE FINISHGROUND
STYLE DESIGNATORGROOVED RACE SURFACE, BANDED OD
THRUST DIRECTIONAL CAPABILITY DESIGNATIONSINGLE
OVERALL OUTSIDE DIAMETER2.9525 INCHES MINIMUM AND 2.9528 INCHES MAXIMUM IN
BORE SMALLEST DIAMETER1.7715 INCHES MINIMUM AND 1.7717 INCHES MAXIMUM IN
ALIGNMENT TYPERIGID
LARGEST BORE DIAMETER1.7715 INCHES MINIMUM AND 1.7717 INCHES MAXIMUM IN
SPECIAL FEATURESINNER RING IS SPLIT;CAGE SILVER PLATED 0.0005-0.0015 THK PER AMS 2412
SUBSTITUTES & CROSS-REFERENCES 1
9109-UK-105Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 9725M84P08?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9725M84P08?
9725M84P08 is a BEARING,BALL,THRUST.
What parts can replace 9725M84P08?
There is 1 known substitute for 9725M84P08: 9109-UK-105. Substitute compatibility should be verified for your specific system.
What is the NSN for 9725M84P08?
9725M84P08 is cataloged in the U.S. Government catalog under NSN 3110-01-187-9085. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9725M84P08

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.