9109-UK-105 — BEARING,BALL,THRUST

✓ Government record, cited

— · TAPERED BEARING

PRODUCT OVERVIEW

9109-UK-105: BEARING,BALL,THRUST.

The BEARING,BALL,THRUST is a the manufacturer industrial component. Key specifications include material: STEEL COMP M50 OUTER RING, alignment_type: RIGID, overall_height: 0.6249 INCHES MINIMUM AND 0.6299 INCHES MAXIMUM IN, surface_finish: GROUND, special_features: INNER RING IS SPLIT;CAGE SILVER PLATED 0.0005-0.0015 THK PER AMS 2412, style_designator: GROOVED RACE SURFACE, BANDED OD. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-187-9085, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

9109-UK-105

NSN: 3110-01-187-9085
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 38443 — SKF USA INC. (USA)

SPECIFICATIONS

material	STEEL COMP M50 OUTER RING
alignment_type	RIGID
overall_height	0.6249 INCHES MINIMUM AND 0.6299 INCHES MAXIMUM IN
surface_finish	GROUND
special_features	INNER RING IS SPLIT;CAGE SILVER PLATED 0.0005-0.0015 THK PER AMS 2412
style_designator	GROOVED RACE SURFACE, BANDED OD
largest_bore_diameter	1.7715 INCHES MINIMUM AND 1.7717 INCHES MAXIMUM IN
bore_smallest_diameter	1.7715 INCHES MINIMUM AND 1.7717 INCHES MAXIMUM IN
end_item_identification	F118 ENGINE QUALIFIED
overall_outside_diameter	2.9525 INCHES MINIMUM AND 2.9528 INCHES MAXIMUM IN
retainer_fabrication_method	MACHINED
standard_tolerance_designation	ABEC NO.5
NSN	3110-01-187-9085

COMPONENT DIAGRAM

KEY FEATURES

•

RETAINER FABRICATION METHOD: MACHINED

•

SURFACE FINISH: GROUND

•

STYLE DESIGNATOR: GROOVED RACE SURFACE, BANDED OD

•

THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE

•

OVERALL OUTSIDE DIAMETER: 2.9525 INCHES MINIMUM AND 2.9528 INCHES MAXIMUM IN

•

BORE SMALLEST DIAMETER: 1.7715 INCHES MINIMUM AND 1.7717 INCHES MAXIMUM IN

•

ALIGNMENT TYPE: RIGID

TECHNICAL CHARACTERISTICS

RETAINER FABRICATION METHOD	MACHINED
OVERALL HEIGHT	0.6249 INCHES MINIMUM AND 0.6299 INCHES MAXIMUM IN
SURFACE FINISH	GROUND
STYLE DESIGNATOR	GROOVED RACE SURFACE, BANDED OD
THRUST DIRECTIONAL CAPABILITY DESIGNATION	SINGLE
OVERALL OUTSIDE DIAMETER	2.9525 INCHES MINIMUM AND 2.9528 INCHES MAXIMUM IN
BORE SMALLEST DIAMETER	1.7715 INCHES MINIMUM AND 1.7717 INCHES MAXIMUM IN
ALIGNMENT TYPE	RIGID
LARGEST BORE DIAMETER	1.7715 INCHES MINIMUM AND 1.7717 INCHES MAXIMUM IN
SPECIAL FEATURES	INNER RING IS SPLIT;CAGE SILVER PLATED 0.0005-0.0015 THK PER AMS 2412

SUBSTITUTES & CROSS-REFERENCES 1

9725M84P08Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy 9109-UK-105?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 9109-UK-105?

9109-UK-105 is a BEARING,BALL,THRUST.

What parts can replace 9109-UK-105?

There is 1 known substitute for 9109-UK-105: 9725M84P08. Substitute compatibility should be verified for your specific system.

What is the NSN for 9109-UK-105?

9109-UK-105 is cataloged in the U.S. Government catalog under NSN 3110-01-187-9085. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

9109-UK-105 — BEARING,BALL,THRUST

Request a Quote — 9109-UK-105