PartsTable
Technical Data Sheet
96574 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: PAPER AND GLUE AND GLYCERIN OVERALL, hole_diameter: 0.531 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 6.281 INCHES NOMINAL IN, cross-sectional_thickness: 0.031 INCHES NOMINAL IN, material_document_and_classification: HH-P-96,TYPE 1 FED STD ALL MATERIAL RESPONSES OVERALL. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-145-1376, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
96574
NSN: 5330-00-145-1376
FSC: 5330
CAGE: 65282 — WHITE MOTOR CORP (USA)
SPECIFICATIONS
materialPAPER AND GLUE AND GLYCERIN OVERALL
hole_diameter0.531 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width6.281 INCHES NOMINAL IN
bolt_hole_quantity4
cross-sectional_thickness0.031 INCHES NOMINAL IN
material_document_and_classificationHH-P-96,TYPE 1 FED STD ALL MATERIAL RESPONSES OVERALL
NSN5330-00-145-1376
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 96574 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
HOLE DIAMETER: 0.531 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
BOLT HOLE QUANTITY: 4
MATERIAL DOCUMENT AND CLASSIFICATION: HH-P-96,TYPE 1 FED STD ALL MATERIAL RESPONSES OVERALL
MATERIAL: PAPER AND GLUE AND GLYCERIN OVERALL
CROSS-SECTIONAL THICKNESS: 0.031 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
HOLE DIAMETER0.531 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
BOLT HOLE QUANTITY4
MATERIAL DOCUMENT AND CLASSIFICATIONHH-P-96,TYPE 1 FED STD ALL MATERIAL RESPONSES OVERALL
MATERIALPAPER AND GLUE AND GLYCERIN OVERALL
OVERALL WIDTH6.281 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS0.031 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
Q67000A125ZInterchangeable
interchangeable cross-reference
interchangeable
CA3005Interchangeable
interchangeable cross-reference
interchangeable
8219B0632-3Interchangeable
interchangeable cross-reference
interchangeable
NAS1786B06-14Interchangeable
interchangeable cross-reference
interchangeable
8845Interchangeable
interchangeable cross-reference
interchangeable
40691AInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability
RoHS CompliantEAR99Not HAZMAT
Ready to buy 96574?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 96574?
96574 is a GASKET.
What parts can replace 96574?
There are 18 known substitutes for 96574: Q67000A125Z, CA3005, 8219B0632-3 and 15 more. Substitute compatibility should be verified for your specific system.
Is 96574 still available?
96574 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 96574