PartsTable
Technical Data Sheet
8845 ✓ Verified by PartsTable
Melissa & Doug · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

With its lush, super-silky black coat and long sleek tail, this panther is a purr-fect pet for any feline fans. And with a sturdy wireframe construction that helps the panther stand nearly three feet tall, this is one graceful creature. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-145-1376, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8845
NSN: 5330-00-145-1376
FSC: 5330
CAGE: 79144 — VELLUMOID, INC. (USA)
SPECIFICATIONS
length0.875 INCHES NOMINAL IN
materialCOPPER ALLOY 360 OVERALL
body_width1.200 INCHES MAXIMUM IN
film_width4.00 INCHES NOMINAL IN
body_height0.950 INCHES MAXIMUM IN
body_length1.150 INCHES MAXIMUM IN
camera_typeGENERAL PURPOSE
film_length5.000 INCHES NOMINAL IN
hole_diameter0.531 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width6.281 INCHES NOMINAL IN
rating_methodELECTRICAL AND WINDING TURNS SINGLE COMPONENT ALL WINDING
turn_quantity15-1/2 SINGLE COMPONENT FOURTH WINDING
NSN5330-00-145-1376
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 8845 MFR: Melissa & Doug ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
HOLE DIAMETER: 0.531 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
BOLT HOLE QUANTITY: 4
MATERIAL DOCUMENT AND CLASSIFICATION: HH-P-96,TYPE 1 FED STD ALL MATERIAL RESPONSES OVERALL
MATERIAL: PAPER AND GLUE AND GLYCERIN OVERALL
CROSS-SECTIONAL THICKNESS: 0.031 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
HOLE DIAMETER0.531 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
BOLT HOLE QUANTITY4
MATERIAL DOCUMENT AND CLASSIFICATIONHH-P-96,TYPE 1 FED STD ALL MATERIAL RESPONSES OVERALL
MATERIALPAPER AND GLUE AND GLYCERIN OVERALL
OVERALL WIDTH6.281 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS0.031 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
Q67000A125ZInterchangeable
interchangeable cross-reference
interchangeable
CA3005Interchangeable
interchangeable cross-reference
interchangeable
8219B0632-3Interchangeable
interchangeable cross-reference
interchangeable
NAS1786B06-14Interchangeable
interchangeable cross-reference
interchangeable
8845Interchangeable
interchangeable cross-reference
interchangeable
40691AInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability
RoHS CompliantEAR99Not HAZMAT
Ready to buy 8845?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8845?
8845 is a VALVE,PNEUMATIC TIRE manufactured by Melissa & Doug.
What parts can replace 8845?
There are 19 known substitutes for 8845: Q67000A125Z, CA3005, 8219B0632-3 and 16 more. Substitute compatibility should be verified for your specific system.
Is 8845 still available?
8845 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8845