PartsTable
Technical Data Sheet
Download PDF

96-10-510-50 — HINGE,AIRCRAFT

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

96-10-510-50: HINGE,AIRCRAFT.

The HINGE,AIRCRAFT is a the manufacturer industrial component. Key specifications include special_features: PRE-PROVISIONED NAVY ITEM, NAVICP PHIL IS POE, end_item_identification: CONTRACTOR SUPPORTED ITEM; E-NSN ISIL, criticality_code_justification: AGAV, part_name_assigned_by_controlling_agency: REMOVABLE HINGE,AIR. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-361-1567, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
96-10-510-50
NSN: 5340-01-361-1567
NIINs: 013611567, 015072867
FSC: 5340 — Hardware, Commercial
CAGE: 94222 — SOUTHCO INC (USA)
SPECIFICATIONS
special_featuresPRE-PROVISIONED NAVY ITEM, NAVICP PHIL IS POE
end_item_identificationCONTRACTOR SUPPORTED ITEM; E-NSN ISIL
criticality_code_justificationAGAV
part_name_assigned_by_controlling_agencyREMOVABLE HINGE,AIR
NSN5340-01-361-1567
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 96-10-510-50 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE QUANTITY: 4
•
REVERSIBLE FEATURE: NOT INCLUDED
•
BODY WIDTH: 2.500 INCHES NOMINAL IN
•
PIN TIP STYLE: OVAL HEAD
•
STYLE DESIGNATOR: BUTT
•
MOUNTING HOLE DIAMETER: 0.190 INCHES NOMINAL IN
•
PIN CENTER TO BODY EDGE DISTANCE: 0.272 INCHES NOMINAL IN
•
HINGE MOUNTING TYPE: HALF MORTISE
TECHNICAL CHARACTERISTICS
MOUNTING HOLE QUANTITY4
REVERSIBLE FEATURENOT INCLUDED
BODY WIDTH2.500 INCHES NOMINAL IN
PIN TIP STYLEOVAL HEAD
STYLE DESIGNATORBUTT
MOUNTING HOLE DIAMETER0.190 INCHES NOMINAL IN
PIN CENTER TO BODY EDGE DISTANCE0.272 INCHES NOMINAL IN
HINGE MOUNTING TYPEHALF MORTISE
MATERIAL THICKNESS0.668 INCHES NOMINAL IN
PIN REMOVABILITYNONREMOVABLE
SUBSTITUTES & CROSS-REFERENCES 3
4337-00007002Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
PL520D01000001 ITEM 50Reference document
Same NSN cross-reference
Reference document — Secondary reference
PL520D01000001/50Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 96-10-510-50?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 96-10-510-50?
96-10-510-50 is a HINGE,AIRCRAFT.
What parts can replace 96-10-510-50?
There are 3 known substitutes for 96-10-510-50: 4337-00007002, PL520D01000001 ITEM 50, PL520D01000001/50. Substitute compatibility should be verified for your specific system.
What is the NSN for 96-10-510-50?
96-10-510-50 is cataloged in the U.S. Government catalog under NSN 5340-01-361-1567. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 96-10-510-50