PartsTable
Technical Data Sheet
Download PDF

4337-00007002 — HINGE,BUTT

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

4337-00007002: HINGE,BUTT.

The HINGE,BUTT is a the manufacturer industrial component. Key specifications include material: UNABLE TO DECODE, body_width: 2.500 INCHES NOMINAL IN, pin_tip_style: OVAL HEAD, performance_type: NOT RATED, pin_removability: NONREMOVABLE, style_designator: BUTT. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-361-1567, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4337-00007002
NSN: 5340-01-361-1567
FSC: 5340 — Hardware, Commercial
CAGE: 33827 — BAE SYSTEMS INTEGRATED DEFENSE SOLUTIONS INC. (USA)
SPECIFICATIONS
materialUNABLE TO DECODE
body_width2.500 INCHES NOMINAL IN
pin_tip_styleOVAL HEAD
knuckle_quantity1
performance_typeNOT RATED
pin_removabilityNONREMOVABLE
special_featuresFINISH-MATTE BLACK POLYESTER POWDER COATED; BLACK NYLON WASHER INCLUDED; RIGHT HAND OFFSET KNUCKLE STYLE; 4 MTG HOLES ARE TAPPED 10-32
style_designatorBUTT
surface_treatmentUNABLE TO DECODE
material_thickness0.668 INCHES NOMINAL IN
reversible_featureNOT INCLUDED
hinge_mounting_typeHALF MORTISE
NSN5340-01-361-1567
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 4337-00007002 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE QUANTITY: 4
•
REVERSIBLE FEATURE: NOT INCLUDED
•
BODY WIDTH: 2.500 INCHES NOMINAL IN
•
PIN TIP STYLE: OVAL HEAD
•
STYLE DESIGNATOR: BUTT
•
MOUNTING HOLE DIAMETER: 0.190 INCHES NOMINAL IN
•
PIN CENTER TO BODY EDGE DISTANCE: 0.272 INCHES NOMINAL IN
•
HINGE MOUNTING TYPE: HALF MORTISE
TECHNICAL CHARACTERISTICS
MOUNTING HOLE QUANTITY4
REVERSIBLE FEATURENOT INCLUDED
BODY WIDTH2.500 INCHES NOMINAL IN
PIN TIP STYLEOVAL HEAD
STYLE DESIGNATORBUTT
MOUNTING HOLE DIAMETER0.190 INCHES NOMINAL IN
PIN CENTER TO BODY EDGE DISTANCE0.272 INCHES NOMINAL IN
HINGE MOUNTING TYPEHALF MORTISE
MATERIAL THICKNESS0.668 INCHES NOMINAL IN
PIN REMOVABILITYNONREMOVABLE
SUBSTITUTES & CROSS-REFERENCES 2
PL520D01000001 ITEM 50Reference document
Same NSN cross-reference
Reference document — Secondary reference
PL520D01000001/50Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 4337-00007002?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4337-00007002?
4337-00007002 is a HINGE,BUTT.
What parts can replace 4337-00007002?
There are 2 known substitutes for 4337-00007002: PL520D01000001 ITEM 50, PL520D01000001/50. Substitute compatibility should be verified for your specific system.
What is the NSN for 4337-00007002?
4337-00007002 is cataloged in the U.S. Government catalog under NSN 5340-01-361-1567. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4337-00007002

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.