Preferred by DVD drive manufacturers, Verbatim DVD media continues to set the standard for high-speed disc performance, reliability, and compatibility. DVD+R Double Layer nearly doubles the storage capacity with two AZO recording layers on a single-sided disc. Certified and supported by the industry high speed Double Layer writers, Verbatim discs are approved for high speed burning up to 6X speeds.
Store up to 8.5GBs of video in approximately 16 minutes or less while maintaining compatibility with most DVD video players or DVD-ROM drives. All backed by Verbatim’s limited lifetime warranty. <br><br><b>Features & Benefits</b><br>-Verbatim DVD+R DL discs burn up to 6X speed with compatible high speed DVD+R DL drives.
Saving you about 20 minutes per burn. <br>-8.5 Gbyte’s of storage capacity on a single-sided disc--No need to flip the disc. <br>-Largest compatible DVD back-up and data archiving format for computer drives.
<br>-Record 4 hours of DVD quality television and video (16 hou This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5133-00-236-4059, indicating validated use in U.S. government and defense logistics supply chains.
| material | RUBBER BODY |
| nominal_width | 0.855 INCHES IN |
| performance_type | STANDARD CAPACITY |
| special_features | 1983 DODGE OMNI |
| style_designator | POSITIVE DRIVE |
| surface_condition | SMOOTH OVERALL |
| nominal_pitch_length | 48.375 INCHES IN |
| strengthening_feature | SYNTHETIC CORD |
| nominal_pitch_distance | 0.375 INCHES IN |
| drive_type_and_quantity | 129 TEETH |
| environmental_protection | OIL RESISTANT |
| NSN | 5133-00-236-4059 |
| POINT ANGLE | 118.0 DEGREES NOMINAL |
| SPECIFICATION/STANDARD DATA | 05047-ASME B94.11M PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| SPECIAL FEATURES | HSS, TAPER LG; FRACTIONAL SIZE 1/4 |
| MATERIAL | STEEL OVERALL |
| FLUTE QUANTITY | 2 |
| SHANK DIAMETER | 0.250 INCHES NOMINAL IN |
| SHANK STYLE | STRAIGHT ROUND |
| OVERALL LENGTH | 6.125 INCHES NOMINAL IN |
| FLUTE LENGTH | 3.750 INCHES NOMINAL IN |
| NOMINAL CUTTING DIAMETER | 0.2500 INCHES IN |