PartsTable
Technical Data Sheet
Download PDF

15116 — CONNECTOR,RECEPTACLE,ELECTRICAL

✓ Government record, cited
Clementoni · TAPERED BEARING
PRODUCT OVERVIEW

15116: CONNECTOR,RECEPTACLE,ELECTRICAL.

CONNECTOR,RECEPTACLE,ELECTRICAL. Key specifications include length: 0.188 INCHES NOMINAL SQUARE END IN, material: STEEL OVERALL, thickness: 0.375 INCHES NOMINAL IN, cone_width: 0.8125 INCHES NOMINAL IN, point_type: CONVENTIONAL, body_length: 1.562 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-100-3157, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
15116
NSN: 3110-00-100-3157
NIINs: 001003157, 001006170, 001897812, 002364059, 003512378, 006823045, 010271359, 010609250, 012208028, 013975816
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 60038 — THE TIMKEN CORPORATION (USA)
SPECIFICATIONS
length0.188 INCHES NOMINAL SQUARE END IN
materialSTEEL OVERALL
thickness0.375 INCHES NOMINAL IN
cone_width0.8125 INCHES NOMINAL IN
point_typeCONVENTIONAL
body_length1.562 INCHES NOMINAL IN
bore_length0.750 INCHES NOMINAL IN
design_typeSTRAIGHT
point_angle118.0 DEGREES NOMINAL
shank_styleSTRAIGHT ROUND
flute_length3.750 INCHES NOMINAL IN
bore_diameter0.5625 INCHES NOMINAL IN
NSN3110-00-100-3157
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 15116 · Clementoni ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: NORMAL ANGLE
•
CONE CORNER RADIUS: 0.0312 INCHES NOMINAL IN
•
CONE WIDTH: 0.8125 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
BORE DIAMETER: 1.1855 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORNORMAL ANGLE
CONE CORNER RADIUS0.0312 INCHES NOMINAL IN
CONE WIDTH0.8125 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONABEC NO.1
BORE DIAMETER1.1855 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 2
M42007Reference document
Same NSN cross-reference
Reference document — Secondary reference
31932Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 15116?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 15116?
15116 is a CONNECTOR,RECEPTACLE,ELECTRICAL manufactured by Clementoni.
What parts can replace 15116?
There are 2 known substitutes for 15116: M42007, 31932. Substitute compatibility should be verified for your specific system.
What is the NSN for 15116?
15116 is cataloged in the U.S. Government catalog under NSN 3110-00-100-3157. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 15116

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.