PartsTable
Technical Data Sheet
Download PDF

944528 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

944528: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.531 INCHES NOMINAL IN, material: STEEL BAND, overall_width: 1.065 INCHES NOMINAL IN, style_designator: SINGLE LOOP, material_thickness: 0.187 INCHES NOMINAL IN, loop_inside_diameter: 1.281 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-081-6573, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
944528
NSN: 5340-00-081-6573
FSC: 5340 — Hardware, Commercial
CAGE: 34623 — AM GENERAL LLC (USA)
SPECIFICATIONS
diameter0.531 INCHES NOMINAL IN
materialSTEEL BAND
overall_width1.065 INCHES NOMINAL IN
style_designatorSINGLE LOOP
material_thickness0.187 INCHES NOMINAL IN
loop_inside_diameter1.281 INCHES NOMINAL IN
distance_from_loop_center_to_tongue_end1.437 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.937 INCHES NOMINAL IN
NSN5340-00-081-6573
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 944528 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: SINGLE LOOP
•
DIAMETER: 0.531 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.187 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.437 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.937 INCHES NOMINAL IN
•
MATERIAL: STEEL BAND
•
LOOP INSIDE DIAMETER: 1.281 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORSINGLE LOOP
DIAMETER0.531 INCHES NOMINAL IN
OVERALL WIDTH1.065 INCHES NOMINAL IN
MATERIAL THICKNESS0.187 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.437 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.937 INCHES NOMINAL IN
MATERIALSTEEL BAND
LOOP INSIDE DIAMETER1.281 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 2
31008Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
5306000816573Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 944528?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 944528?
944528 is a CLAMP,LOOP.
What parts can replace 944528?
There are 2 known substitutes for 944528: 31008, 5306000816573. Substitute compatibility should be verified for your specific system.
What is the NSN for 944528?
944528 is cataloged in the U.S. Government catalog under NSN 5340-00-081-6573. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 944528