PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5306000816573
5306000816573 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.531 INCHES NOMINAL IN, material: STEEL BAND, overall_width: 1.065 INCHES NOMINAL IN, style_designator: SINGLE LOOP, material_thickness: 0.187 INCHES NOMINAL IN, loop_inside_diameter: 1.281 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-081-6573, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5306000816573
NSN: 5340-00-081-6573
FSC: 5340
CAGE: A00AM — E.C.A ETABLISSEMENT CENTRAL DES APPROVISIONNEMENTS DES FORCES ARMEES ROYALES
SPECIFICATIONS
diameter0.531 INCHES NOMINAL IN
materialSTEEL BAND
overall_width1.065 INCHES NOMINAL IN
style_designatorSINGLE LOOP
material_thickness0.187 INCHES NOMINAL IN
loop_inside_diameter1.281 INCHES NOMINAL IN
distance_from_loop_center_to_tongue_end1.437 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.937 INCHES NOMINAL IN
NSN5340-00-081-6573
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5306000816573 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LOOP INSIDE DIAMETER: 1.281 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SINGLE LOOP
•
MATERIAL THICKNESS: 0.187 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.937 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.437 INCHES NOMINAL IN
•
MATERIAL: STEEL BAND
•
DIAMETER: 0.531 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
LOOP INSIDE DIAMETER1.281 INCHES NOMINAL IN
STYLE DESIGNATORSINGLE LOOP
MATERIAL THICKNESS0.187 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.937 INCHES NOMINAL IN
OVERALL WIDTH1.065 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.437 INCHES NOMINAL IN
MATERIALSTEEL BAND
DIAMETER0.531 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
1001541-001Upgraded Successor
successor cross-reference
successor
31-008Upgraded Successor
successor cross-reference
successor
UG274UInterchangeable
interchangeable cross-reference
interchangeable
31009-BTInterchangeable
interchangeable cross-reference
interchangeable
MILE16366Interchangeable
interchangeable cross-reference
interchangeable
31008REVDInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5306000816573?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5306000816573?
5306000816573 is a CLAMP,LOOP.
What parts can replace 5306000816573?
There are 14 known substitutes for 5306000816573: 1001541-001, 31-008, UG274U and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5306000816573?
5306000816573 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-081-6573. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5306000816573

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026