PartsTable
Technical Data Sheet
PartsTable / O-RING / 9443135AAP332
9443135AAP332 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC, temp_rating: -65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF, hardness_rating: 75.0 SHORE DUROMETER A NOMINAL, outside_diameter: 2.770 INCHES NOMINAL IN, center_hole_diameter: 2.332 INCHES MINIMUM AND 2.368 INCHES MAXIMUM IN, elongation_percentage: 125 MAXIMUM. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-118-2080, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9443135AAP332
NSN: 5331-01-118-2080
FSC: 5331 — O-RING
CAGE: 03502 — GENERAL ELECTRIC CO NAVAL AND DRIVE TURBINE SYSTEMS DEPT (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC
temp_rating-65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
hardness_rating75.0 SHORE DUROMETER A NOMINAL
outside_diameter2.770 INCHES NOMINAL IN
center_hole_diameter2.332 INCHES MINIMUM AND 2.368 INCHES MAXIMUM IN
elongation_percentage125 MAXIMUM
cross-sectional_height0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
NSN5331-01-118-2080
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 9443135AAP332 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE DIAMETER: 2.332 INCHES MINIMUM AND 2.368 INCHES MAXIMUM IN
•
HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL
•
MATERIAL: RUBBER SYNTHETIC
•
CROSS-SECTIONAL HEIGHT: 0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
•
TEMP RATING: -65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
•
ELONGATION PERCENTAGE: 125 MAXIMUM
•
OUTSIDE DIAMETER: 2.770 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER2.332 INCHES MINIMUM AND 2.368 INCHES MAXIMUM IN
HARDNESS RATING75.0 SHORE DUROMETER A NOMINAL
MATERIALRUBBER SYNTHETIC
CROSS-SECTIONAL HEIGHT0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
TEMP RATING-65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
ELONGATION PERCENTAGE125 MAXIMUM
OUTSIDE DIAMETER2.770 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
2-332 N304-75Interchangeable
interchangeable cross-reference
interchangeable
XT36297PC32Interchangeable
interchangeable cross-reference
interchangeable
4810-771638REVBInterchangeable
interchangeable cross-reference
interchangeable
5330006411481Interchangeable
interchangeable cross-reference
interchangeable
15332865Interchangeable
interchangeable cross-reference
interchangeable
332-7377Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 9443135AAP332?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9443135AAP332?
9443135AAP332 is a O-RING.
What parts can replace 9443135AAP332?
There are 17 known substitutes for 9443135AAP332: 2-332 N304-75, XT36297PC32, 4810-771638REVB and 14 more. Substitute compatibility should be verified for your specific system.
Is 9443135AAP332 still available?
9443135AAP332 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9443135AAP332

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026