PartsTable
Technical Data Sheet
Download PDF

9422502 — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

9422502: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: HEXAGON, head_height: 0.250 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN, thread_class: 2A A, thread_length: 1.000 INCHES MINIMUM AND 1.188 INCHES MAXIMUM IN, screw_material: STEEL, fastener_length: 3.906 INCHES MINIMUM AND 4.000 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-043-5701, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9422502
NSN: 5305-01-043-5701
FSC: 5305 — Screws
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
head_styleHEXAGON
head_height0.250 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
thread_class2A A
thread_length1.000 INCHES MINIMUM AND 1.188 INCHES MAXIMUM IN
screw_materialSTEEL
fastener_length3.906 INCHES MINIMUM AND 4.000 INCHES MAXIMUM IN
hardness_rating32.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM
special_featuresADDITIONAL SLOTS MAY BE ADDED AT ANY ANGLE
thread_directionRIGHT-HAND
width_between_flats0.551 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN
internal_drive_styleSLOT
nominal_thread_diameter0.375 INCHES IN
NSN5305-01-043-5701
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 9422502 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.250 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
•
FASTENER LENGTH: 3.906 INCHES MINIMUM AND 4.000 INCHES MAXIMUM IN
•
THREAD LENGTH: 1.000 INCHES MINIMUM AND 1.188 INCHES MAXIMUM IN
•
HARDNESS RATING: 32.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM
•
NOMINAL THREAD DIAMETER: 0.375 INCHES IN
•
HEAD STYLE: HEXAGON
•
THREAD DIRECTION: RIGHT-HAND
•
WIDTH BETWEEN FLATS: 0.551 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.250 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
FASTENER LENGTH3.906 INCHES MINIMUM AND 4.000 INCHES MAXIMUM IN
THREAD LENGTH1.000 INCHES MINIMUM AND 1.188 INCHES MAXIMUM IN
HARDNESS RATING32.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM
NOMINAL THREAD DIAMETER0.375 INCHES IN
HEAD STYLEHEXAGON
THREAD DIRECTIONRIGHT-HAND
WIDTH BETWEEN FLATS0.551 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN
SCREW MATERIALSTEEL
SPECIAL FEATURESADDITIONAL SLOTS MAY BE ADDED AT ANY ANGLE
SUBSTITUTES & CROSS-REFERENCES 3
5305010435701Reference document
Same NSN cross-reference
Reference document — Informative reference only
2GK925Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
62.90.015Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 9422502?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9422502?
9422502 is a SCREW,MACHINE.
What parts can replace 9422502?
There are 3 known substitutes for 9422502: 5305010435701, 2GK925, 62.90.015. Substitute compatibility should be verified for your specific system.
What is the NSN for 9422502?
9422502 is cataloged in the U.S. Government catalog under NSN 5305-01-043-5701. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9422502

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.