PartsTable
Technical Data Sheet
Download PDF

62.90.015 — GASKET

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

62.90.015: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include end_item_identification: E-2C AIRCRAFT MODEL CODE. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-043-5701, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
62.90.015
NSN: 5305-01-043-5701
NIINs: 010435701, 014589144
FSC: 5305 — Screws
CAGE: 0124B — SAPA OPERACIONES SL (ESP)
SPECIFICATIONS
end_item_identificationE-2C AIRCRAFT MODEL CODE
NSN5305-01-043-5701
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 62.90.015 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.250 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
•
FASTENER LENGTH: 3.906 INCHES MINIMUM AND 4.000 INCHES MAXIMUM IN
•
THREAD LENGTH: 1.000 INCHES MINIMUM AND 1.188 INCHES MAXIMUM IN
•
HARDNESS RATING: 32.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM
•
NOMINAL THREAD DIAMETER: 0.375 INCHES IN
•
HEAD STYLE: HEXAGON
•
THREAD DIRECTION: RIGHT-HAND
•
WIDTH BETWEEN FLATS: 0.551 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.250 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
FASTENER LENGTH3.906 INCHES MINIMUM AND 4.000 INCHES MAXIMUM IN
THREAD LENGTH1.000 INCHES MINIMUM AND 1.188 INCHES MAXIMUM IN
HARDNESS RATING32.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM
NOMINAL THREAD DIAMETER0.375 INCHES IN
HEAD STYLEHEXAGON
THREAD DIRECTIONRIGHT-HAND
WIDTH BETWEEN FLATS0.551 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN
SCREW MATERIALSTEEL
SPECIAL FEATURESADDITIONAL SLOTS MAY BE ADDED AT ANY ANGLE
SUBSTITUTES & CROSS-REFERENCES 2
5305010435701Reference document
Same NSN cross-reference
Reference document — Informative reference only
2GK925Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 62.90.015?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 62.90.015?
62.90.015 is a GASKET.
What parts can replace 62.90.015?
There are 2 known substitutes for 62.90.015: 5305010435701, 2GK925. Substitute compatibility should be verified for your specific system.
What is the NSN for 62.90.015?
62.90.015 is cataloged in the U.S. Government catalog under NSN 5305-01-043-5701. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 62.90.015

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.