PartsTable
Technical Data Sheet
Download PDF

MS29513-012 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

MS29513-012: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include end_item_identification: KC-46 AIRCRAFT, reference_number_differentiating_characteristics: ITEM IS FAA CERTIFIED. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-248-3836, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS29513-012
NSN: 5331-00-248-3836
NIINs: 002483836, 012417740, 016694261
FSC: 5331 — O-ring
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
end_item_identificationKC-46 AIRCRAFT
reference_number_differentiating_characteristicsITEM IS FAA CERTIFIED
NSN5331-00-248-3836
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MS29513-012 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -65.0 FAHRENHEIT AND 200.0 FAHRENHEIT DEGF
•
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 0.504 INCHES NOMINAL IN
•
ELONGATION PERCENTAGE: 200 MAXIMUM
•
CENTER HOLE DIAMETER: 0.359 INCHES MINIMUM AND 0.369 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
TECHNICAL CHARACTERISTICS
TEMP RATING-65.0 FAHRENHEIT AND 200.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
OUTSIDE DIAMETER0.504 INCHES NOMINAL IN
ELONGATION PERCENTAGE200 MAXIMUM
CENTER HOLE DIAMETER0.359 INCHES MINIMUM AND 0.369 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
SUBSTITUTES & CROSS-REFERENCES 9
AS568-012MIL-P- 5315Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
725-70-012Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
MS29513-12Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
012-C-69Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
10V60-141-012Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
8A9009Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Shelf-life managedNo demilitarization required
Ready to buy MS29513-012?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS29513-012?
MS29513-012 is a O-RING.
What parts can replace MS29513-012?
There are 9 known substitutes for MS29513-012: AS568-012MIL-P- 5315, 725-70-012, MS29513-12 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS29513-012?
MS29513-012 is cataloged in the U.S. Government catalog under NSN 5331-00-248-3836. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS29513-012