PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 929032
929032 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,THRUST is a the manufacturer industrial component. Key specifications include special_features: ITEM IS MADE OF VARIOUS MATERIALS INCLUDING PLYWOOD AND FOAM RUBBER PAD, end_item_identification: 5419-01-697-4135, part_name_assigned_by_controlling_agency: SHOWER STALL PACKOUT PLATFORM. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-038-7920, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
929032
NSN: 3110-00-038-7920
FSC: 3110
CAGE: 06848 — HONEYWELL INTERNATIONAL INC DIV AEROSPACE-SOUTH BEND (BENDIX DR) (USA)
SPECIFICATIONS
special_featuresITEM IS MADE OF VARIOUS MATERIALS INCLUDING PLYWOOD AND FOAM RUBBER PAD
end_item_identification5419-01-697-4135
part_name_assigned_by_controlling_agencySHOWER STALL PACKOUT PLATFORM
NSN3110-00-038-7920
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 929032 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
•
ALIGNMENT TYPE: RIGID
•
STYLE DESIGNATOR: GROOVED RACE SURFACE
•
MATERIAL: STEEL OVERALL
•
SURFACE FINISH: GROUND
•
BORE SMALLEST DIAMETER: 0.7047 INCHES NOMINAL IN
•
OVERALL OUTSIDE DIAMETER: 1.3760 INCHES MINIMUM AND 1.3780 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
THRUST DIRECTIONAL CAPABILITY DESIGNATIONSINGLE
ALIGNMENT TYPERIGID
STYLE DESIGNATORGROOVED RACE SURFACE
MATERIALSTEEL OVERALL
OVERALL HEIGHT0.3900 INCHES MINIMUM AND 0.3930 INCHES MAXIMUM IN
SURFACE FINISHGROUND
BORE SMALLEST DIAMETER0.7047 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER1.3760 INCHES MINIMUM AND 1.3780 INCHES MAXIMUM IN
LARGEST BORE DIAMETER0.7197 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
19818Interchangeable
interchangeable cross-reference
interchangeable
63016Interchangeable
interchangeable cross-reference
interchangeable
929032Interchangeable
interchangeable cross-reference
interchangeable
07X838Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 929032?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 929032?
929032 is a BEARING,BALL,THRUST.
What parts can replace 929032?
There are 4 known substitutes for 929032: 19818, 63016, 929032 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 929032?
929032 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-038-7920. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 929032

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026