PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 07X838
07X838 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,THRUST is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, alignment_type: RIGID, overall_height: 0.3900 INCHES MINIMUM AND 0.3930 INCHES MAXIMUM IN, surface_finish: GROUND, style_designator: GROOVED RACE SURFACE, largest_bore_diameter: 0.7197 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-038-7920, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
07X838
NSN: 3110-00-038-7920
FSC: 3110
CAGE: 03489 — ANDREWS BEARING CORP DIV OF MPB CORP SUB OF WHEELABRATOR-FRYE INC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
alignment_typeRIGID
overall_height0.3900 INCHES MINIMUM AND 0.3930 INCHES MAXIMUM IN
surface_finishGROUND
style_designatorGROOVED RACE SURFACE
largest_bore_diameter0.7197 INCHES NOMINAL IN
bore_smallest_diameter0.7047 INCHES NOMINAL IN
overall_outside_diameter1.3760 INCHES MINIMUM AND 1.3780 INCHES MAXIMUM IN
thrust_directional_capability_designationSINGLE
NSN3110-00-038-7920
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 07X838 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
•
ALIGNMENT TYPE: RIGID
•
STYLE DESIGNATOR: GROOVED RACE SURFACE
•
MATERIAL: STEEL OVERALL
•
SURFACE FINISH: GROUND
•
BORE SMALLEST DIAMETER: 0.7047 INCHES NOMINAL IN
•
OVERALL OUTSIDE DIAMETER: 1.3760 INCHES MINIMUM AND 1.3780 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
THRUST DIRECTIONAL CAPABILITY DESIGNATIONSINGLE
ALIGNMENT TYPERIGID
STYLE DESIGNATORGROOVED RACE SURFACE
MATERIALSTEEL OVERALL
OVERALL HEIGHT0.3900 INCHES MINIMUM AND 0.3930 INCHES MAXIMUM IN
SURFACE FINISHGROUND
BORE SMALLEST DIAMETER0.7047 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER1.3760 INCHES MINIMUM AND 1.3780 INCHES MAXIMUM IN
LARGEST BORE DIAMETER0.7197 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
19818Interchangeable
interchangeable cross-reference
interchangeable
63016Interchangeable
interchangeable cross-reference
interchangeable
929032Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 07X838?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 07X838?
07X838 is a BEARING,BALL,THRUST.
What parts can replace 07X838?
There are 3 known substitutes for 07X838: 19818, 63016, 929032. Substitute compatibility should be verified for your specific system.
What is the NSN for 07X838?
07X838 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-038-7920. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 07X838

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026