PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 924468C1
924468C1 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEALING ELEMENT, case_style: SQUARE, seal_width: 0.500 INCHES NOMINAL IN, outside_diameter: 3.066 INCHES NOMINAL IN, surface_treatment: PLASTIC CASE, housing_bore_diameter: 3.061 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-752-9032, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
924468C1
NSN: 5330-00-752-9032
FSC: 5330
CAGE: 29510 — KOMATSU AMERICAN INTL CO (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC SEALING ELEMENT
case_styleSQUARE
seal_width0.500 INCHES NOMINAL IN
outside_diameter3.066 INCHES NOMINAL IN
surface_treatmentPLASTIC CASE
housing_bore_diameter3.061 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter2.125 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed3600 FEET PER MINUTE FT
NSN5330-00-752-9032
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 924468C1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT: PLASTIC CASE
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 3600 FEET PER MINUTE FT
•
ACCOMMODATED SHAFT DIAMETER: 2.125 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT
•
HOUSING BORE DIAMETER: 3.061 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 3.066 INCHES NOMINAL IN
•
SEAL WIDTH: 0.500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE TREATMENTPLASTIC CASE
ACCOMMODATED SHAFT MAXIMUM RATED SPEED3600 FEET PER MINUTE FT
ACCOMMODATED SHAFT DIAMETER2.125 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
MATERIALSTEEL CASE
HOUSING BORE DIAMETER3.061 INCHES NOMINAL IN
OUTSIDE DIAMETER3.066 INCHES NOMINAL IN
SEAL WIDTH0.500 INCHES NOMINAL IN
CASE STYLESQUARE
SEALING ELEMENT STYLEANGULAR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 25
361-60094Interchangeable
interchangeable cross-reference
interchangeable
W8119088PC14Interchangeable
interchangeable cross-reference
interchangeable
C12A3Interchangeable
interchangeable cross-reference
interchangeable
3968-001Interchangeable
interchangeable cross-reference
interchangeable
T-9110Interchangeable
interchangeable cross-reference
interchangeable
455369Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 924468C1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 924468C1?
924468C1 is a SEAL,PLAIN ENCASED.
What parts can replace 924468C1?
There are 25 known substitutes for 924468C1: 361-60094, W8119088PC14, C12A3 and 22 more. Substitute compatibility should be verified for your specific system.
Is 924468C1 still available?
924468C1 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 924468C1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026