PartsTable
Technical Data Sheet
PartsTable / MRO / 17702
17702 ✓ Verified by PartsTable
InLine · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

InLine® S-VGA monitor cable with double shielding for video signal transmission. Constructed with 3 single-shielded coaxial lines (RGB) and 7 data lines this cable is fitted with 15-pin SVGA connectors with 1:1 connections (without PIN 9) while the blue colouring of the connectors, as per PC99 standard, ensures easy identification of the correct port to which the SVGA monitor cable should be connected. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-164-8850, indicating validated use in U.S.

government and defense logistics supply chains.

WHERE IT FITS
MRO→ MRO_GENERAL→ 17702
NSN: 5330-00-164-8850
FSC: 5330
CAGE: 80201 — SKF USA INC. DBA SKF AEROSPACE SEALING SOLUTIONS (USA)
SPECIFICATIONS
materialSTEEL CASE
body_width0.240 INCHES MINIMUM AND 0.325 INCHES MAXIMUM IN
case_styleSQUARE
seal_width0.500 INCHES NOMINAL IN
body_height0.085 INCHES MAXIMUM IN
body_length0.440 INCHES MAXIMUM IN
temp_rating-65.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF
inclosure_typeFULLY INCLOSED
memory_capacityUNKNOWN
outside_diameter3.066 INCHES NOMINAL IN
output_logic_formTRANSISTOR-TRANSISTOR LOGIC
surface_treatmentPLASTIC CASE
NSN5330-00-164-8850
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 17702 MFR: InLine ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 3.005 INCHES NOMINAL IN
•
CASE STYLE: SQUARE
•
SURFACE TREATMENT: PLASTIC CASE
•
MATERIAL: STEEL CASE
•
SEAL WIDTH: 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN
•
SEALING ELEMENT STYLE: ANGULAR
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER3.005 INCHES NOMINAL IN
CASE STYLESQUARE
SURFACE TREATMENTPLASTIC CASE
MATERIALSTEEL CASE
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
SEAL WIDTH0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN
SEALING ELEMENT STYLEANGULAR
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
ACCOMMODATED SHAFT DIAMETER1.750 INCHES NOMINAL IN
HOUSING BORE DIAMETER2.999 INCHES MINIMUM AND 3.002 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
17-702Interchangeable
interchangeable cross-reference
interchangeable
17527Interchangeable
interchangeable cross-reference
interchangeable
619-3538-001Interchangeable
interchangeable cross-reference
interchangeable
50308SInterchangeable
interchangeable cross-reference
interchangeable
1791687Interchangeable
interchangeable cross-reference
interchangeable
0203207Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 17702?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 17702?
17702 is a MICROCIRCUIT,DIGITAL manufactured by InLine. It is classified as a MRO (MRO_GENERAL).
What parts can replace 17702?
There are 13 known substitutes for 17702: 17-702, 17527, 619-3538-001 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 17702?
17702 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-164-8850. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 17702

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026