PartsTable
Technical Data Sheet
Download PDF

90600903 — 90600903

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

90600903: 90600903.

The 90600903 is a the manufacturer industrial component. Key specifications include overall_width: 2.96 INCHES NOMINAL IN, overall_height: 1.70 INCHES NOMINAL IN, overall_length: 3.15 INCHES NOMINAL IN, special_features: 1 PORT SERIAL DEVICE SERVER W/ 10/100 MBPS, AUTO MDI/MDIX, CONNECTOR IS 8 PIN RJ45. MBPS.

This part is cataloged in the U.S. Government catalog under NSN 5305-00-764-2964, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 90600903
NSN: 5305-00-764-2964
NIINs: 007642964, 016253788
FSC: 5305 — Screws
CAGE: 90536 — LOCKHEED MARTIN CORP DBA LOCKHEED MARTIN DIV MST - EAGAN (USA)
SPECIFICATIONS
overall_width2.96 INCHES NOMINAL IN
overall_height1.70 INCHES NOMINAL IN
overall_length3.15 INCHES NOMINAL IN
special_features1 PORT SERIAL DEVICE SERVER W/ 10/100 MBPS, AUTO MDI/MDIX, CONNECTOR IS 8 PIN RJ45. MBPS
NSN5305-00-764-2964
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 90600903 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SCREW SURFACE TREATMENT: PASSIVATE
•
FASTENER LENGTH: 0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES
•
THREAD LENGTH: 0.276 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.086 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
•
SCREW MATERIAL: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316
TECHNICAL CHARACTERISTICS
SCREW SURFACE TREATMENTPASSIVATE
FASTENER LENGTH0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD ALL MATERIAL RESPONSES
THREAD LENGTH0.276 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.086 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALSTEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316
MINIMUM TENSILE STRENGTH80000 POUNDS PER SQUARE INCH LBS
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
SUBSTITUTES & CROSS-REFERENCES 9
048303-004Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
3157138-02Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
MS51959-4Reference document
Same NSN cross-reference
Reference document — Secondary reference
0920-4Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
22203ADXReference document
Same NSN cross-reference
Reference document — Secondary reference
946839-0205Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 90600903?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 90600903?
90600903 is a 90600903. It is classified as a MRO (MRO_GENERAL).
What parts can replace 90600903?
There are 9 known substitutes for 90600903: 048303-004, 3157138-02, MS51959-4 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 90600903?
90600903 is cataloged in the U.S. Government catalog under NSN 5305-00-764-2964. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 90600903