PartsTable
Technical Data Sheet
Download PDF

MS51959-4 — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

MS51959-4: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, thread_class: 2A A, head_diameter: 0.147 INCHES MINIMUM AND 0.172 INCHES MAXIMUM IN, thread_length: 0.276 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN, screw_material: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316, fastener_length: 0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-764-2964, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS51959-4
NSN: 5305-00-764-2964
FSC: 5305 — Screws
CAGE: 80205 — NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE (USA)
SPECIFICATIONS
head_styleFLAT COUNTERSUNK
thread_class2A A
head_diameter0.147 INCHES MINIMUM AND 0.172 INCHES MAXIMUM IN
thread_length0.276 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
screw_materialSTEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316
fastener_length0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
countersink_angle80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.086 INCHES IN
screw_surface_treatmentPASSIVATE
minimum_tensile_strength80000 POUNDS PER SQUARE INCH LBS
NSN5305-00-764-2964
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS51959-4 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SCREW SURFACE TREATMENT: PASSIVATE
•
FASTENER LENGTH: 0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES
•
THREAD LENGTH: 0.276 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.086 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
•
SCREW MATERIAL: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316
TECHNICAL CHARACTERISTICS
SCREW SURFACE TREATMENTPASSIVATE
FASTENER LENGTH0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD ALL MATERIAL RESPONSES
THREAD LENGTH0.276 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.086 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALSTEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316
MINIMUM TENSILE STRENGTH80000 POUNDS PER SQUARE INCH LBS
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
SUBSTITUTES & CROSS-REFERENCES 9
048303-004Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
3157138-02Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
906009-03Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
0920-4Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
22203ADXReference document
Same NSN cross-reference
Reference document — Secondary reference
946839-0205Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy MS51959-4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS51959-4?
MS51959-4 is a SCREW,MACHINE.
What parts can replace MS51959-4?
There are 9 known substitutes for MS51959-4: 048303-004, 3157138-02, 906009-03 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS51959-4?
MS51959-4 is cataloged in the U.S. Government catalog under NSN 5305-00-764-2964. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS51959-4