PartsTable / COMPONENT / 9041842
9041842
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The GASKET is a the manufacturer industrial component. Key specifications include material: PAPER AND GLUE OVERALL, hole_diameter: 0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 6.313 INCHES NOMINAL IN, aperture_diameter: 5.188 INCHES NOMINAL IN, bolt_circle_diameter: 5.688 INCHES NOMINAL IN, cross-sectional_thickness: 0.015 INCHES MINIMUM AND 0.021 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-090-5776, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
9041842
NSN: 5330-00-090-5776 FSC: 5330 CAGE: 30379 — EUCLID INC (USA)
SPECIFICATIONS
material PAPER AND GLUE OVERALL hole_diameter 0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN overall_width 6.313 INCHES NOMINAL IN aperture_diameter 5.188 INCHES NOMINAL IN bolt_circle_diameter 5.688 INCHES NOMINAL IN cross-sectional_thickness 0.015 INCHES MINIMUM AND 0.021 INCHES MAXIMUM IN cross-sectional_shape_style SOLID SINGLE OR COMPOSITION side_radius_from_gasket_center 2.938 INCHES NOMINAL IN NSN 5330-00-090-5776
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 9041842
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• MATERIAL: PAPER AND GLUE OVERALL
• HOLE DIAMETER: 0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
• BOLT CIRCLE DIAMETER: 5.688 INCHES NOMINAL IN
• SIDE RADIUS FROM GASKET CENTER: 2.938 INCHES NOMINAL IN
• CROSS-SECTIONAL THICKNESS: 0.015 INCHES MINIMUM AND 0.021 INCHES MAXIMUM IN
• APERTURE DIAMETER: 5.188 INCHES NOMINAL IN
• CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL PAPER AND GLUE OVERALL HOLE DIAMETER 0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN BOLT CIRCLE DIAMETER 5.688 INCHES NOMINAL IN SIDE RADIUS FROM GASKET CENTER 2.938 INCHES NOMINAL IN OVERALL WIDTH 6.313 INCHES NOMINAL IN CROSS-SECTIONAL THICKNESS 0.015 INCHES MINIMUM AND 0.021 INCHES MAXIMUM IN APERTURE DIAMETER 5.188 INCHES NOMINAL IN CROSS-SECTIONAL SHAPE STYLE SOLID SINGLE OR COMPOSITION
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
MILE1 Interchangeable interchangeable cross-reference
interchangeable
5852 Interchangeable interchangeable cross-reference
interchangeable
MIL-E-1/92 Interchangeable interchangeable cross-reference
interchangeable
8333162 Interchangeable interchangeable cross-reference
interchangeable
800009E Interchangeable interchangeable cross-reference
interchangeable
1A58-52 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 9041842?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9041842?
9041842 is a GASKET.
What parts can replace 9041842?
There are 24 known substitutes for 9041842: MILE1, 5852, MIL-E-1/92 and 21 more. Substitute compatibility should be verified for your specific system.
Is 9041842 still available?
9041842 is currently cancelled.
Request a Quote — 9041842