PartsTable
Technical Data Sheet
Download PDF

41842 — TERMINAL,LUG

✓ Government record, cited
Lindy · ORING SEAL
PRODUCT OVERVIEW

41842: TERMINAL,LUG.

The TERMINAL,LUG is a Lindy industrial component. Key specifications include length: 54.000 INCHES NOMINAL IN, end_type: UNARMED, material: CHROMIC GUT SUTURE, sterility: STERILE, hole_diameter: 0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 0.286 INCHES IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-090-5776, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
41842
NSN: 5330-00-090-5776
NIINs: 000905776, 008105526, 011806756
FSC: 5330 — Packing and Gasket Materials
CAGE: 97907 — TEREX CORP (USA)
SPECIFICATIONS
length54.000 INCHES NOMINAL IN
end_typeUNARMED
materialCHROMIC GUT SUTURE
sterilitySTERILE
hole_diameter0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width0.286 INCHES IN
overall_length0.782 INCHES IN
size_designator3-0
aperture_diameter5.188 INCHES NOMINAL IN
basic_shape_styleCRIMP
surface_treatmentTIN CONDUCTOR ACCOMMODATION SINGLE LAYER
material_thickness0.031 INCHES IN
NSN5330-00-090-5776
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 41842 MFR: Lindy ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.015 INCHES MINIMUM AND 0.021 INCHES MAXIMUM IN
•
SIDE RADIUS FROM GASKET CENTER: 2.938 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
APERTURE DIAMETER: 5.188 INCHES NOMINAL IN
•
BOLT CIRCLE DIAMETER: 5.688 INCHES NOMINAL IN
•
MATERIAL: PAPER AND GLUE OVERALL
•
HOLE DIAMETER: 0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.015 INCHES MINIMUM AND 0.021 INCHES MAXIMUM IN
SIDE RADIUS FROM GASKET CENTER2.938 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OVERALL WIDTH6.313 INCHES NOMINAL IN
APERTURE DIAMETER5.188 INCHES NOMINAL IN
BOLT CIRCLE DIAMETER5.688 INCHES NOMINAL IN
MATERIALPAPER AND GLUE OVERALL
HOLE DIAMETER0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
SUBSTITUTES & CROSS-REFERENCES 7
9041842Reference document
Same NSN cross-reference
Reference document — Secondary reference
395413Reference document
Same NSN cross-reference
Reference document — Secondary reference
5852Reference document
Same NSN cross-reference
Reference document — Secondary reference
BB22118Reference document
Same NSN cross-reference
Reference document — Secondary reference
86677HReference document
Same NSN cross-reference
Reference document — Secondary reference
H2924Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 41842?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 41842?
41842 is a TERMINAL,LUG manufactured by Lindy.
What parts can replace 41842?
There are 7 known substitutes for 41842: 9041842, 395413, 5852 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 41842?
41842 is cataloged in the U.S. Government catalog under NSN 5330-00-090-5776. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 41842

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.