901219 — BEARING,BALL,ANNULAR

✓ Government record, cited

— · PIPE SECTION

PRODUCT OVERVIEW

901219: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include bore_shape: STRAIGHT, bore_diameter: 95.00 MILLIMETERS NOMINAL MM, overall_width: 32.0000 MILLIMETERS NOMINAL MM, load_direction: RADIAL, surface_finish: GROUND, lubrication_material: LUBRICANT. This part is cataloged in the U.S.

Government catalog under NSN 4720-00-067-0454, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

901219

NSN: 4720-00-067-0454
NIINs: 000670454, 001556474, 008392326
FSC: 4720 — Hose and Flexible Tubing
CAGE: 57633 — SCHAEFF NAMCO INC (USA)

SPECIFICATIONS

bore_shape	STRAIGHT
bore_diameter	95.00 MILLIMETERS NOMINAL MM
overall_width	32.0000 MILLIMETERS NOMINAL MM
load_direction	RADIAL
surface_finish	GROUND
lubrication_material	LUBRICANT
overall_outside_diameter	170.00 MILLIMETERS NOMINAL MM
internal_fit-up_designation	STANDARD
standard_tolerance_designation	ABEC NO.1
NSN	4720-00-067-0454

COMPONENT DIAGRAM

KEY FEATURES

•

TEMP RATING: -40.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF

•

MINIMUM INSIDE BENDING RADIUS: 4.625 INCHES IN

•

VACUUM IN TORR: 50.8

•

LAYER COMPOSITION AND LOCATION: 1ST LAYER BRAIDED FABRIC AND 2ND LAYER BRAIDED STEEL WIRE AND OUTER LAYER RUBBER IMPREGNATED BRAIDED FABRIC

•

CROSS-SECTIONAL SHAPE STYLE: ROUND

•

OUTSIDE DIAMETER: 0.766 INCHES NOMINAL IN

•

OPERATING PRESSURE: 2000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS

•

SPECIFICATION/STANDARD DATA: 81343-SAE J517,100R5 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD

TECHNICAL CHARACTERISTICS

TEMP RATING	-40.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF
MINIMUM INSIDE BENDING RADIUS	4.625 INCHES IN
VACUUM IN TORR	50.8
LAYER COMPOSITION AND LOCATION	1ST LAYER BRAIDED FABRIC AND 2ND LAYER BRAIDED STEEL WIRE AND OUTER LAYER RUBBER IMPREGNATED BRAIDED FABRIC
CROSS-SECTIONAL SHAPE STYLE	ROUND
OUTSIDE DIAMETER	0.766 INCHES NOMINAL IN
OPERATING PRESSURE	2000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
SPECIFICATION/STANDARD DATA	81343-SAE J517,100R5 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
NONDEFINITIVE SPEC/STD DATA	8 SIZE
INSIDE DIAMETER	0.406 INCHES NOMINAL IN

SUBSTITUTES & CROSS-REFERENCES 10

2BE910Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

8QWReference document

Same NSN cross-reference

Reference document — Secondary reference

100R5-8Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

81503Reference document

Same NSN cross-reference

Reference document — Secondary reference

1503-8Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

547-649-013Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Shelf-life managedAcquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy 901219?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 901219?

901219 is a BEARING,BALL,ANNULAR.

What parts can replace 901219?

There are 10 known substitutes for 901219: 2BE910, 8QW, 100R5-8 and 7 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 901219?

901219 is cataloged in the U.S. Government catalog under NSN 4720-00-067-0454. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

901219 — BEARING,BALL,ANNULAR

Request a Quote — 901219