PartsTable
Technical Data Sheet
Download PDF

9011706 — PUNCH,HAND

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

9011706: PUNCH,HAND.

The PUNCH,HAND is a the manufacturer industrial component. Key specifications include head_style: PAN NO. 2, head_height: 0.072 INCHES MINIMUM AND 0.082 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.256 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN, thread_length: 1.750 INCHES MINIMUM IN, screw_material: STEEL.

This part is cataloged in the U.S. Government catalog under NSN 5305-00-633-0697, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9011706
NSN: 5305-00-633-0697
NIINs: 006330697, 008315528
FSC: 5305 — Screws
CAGE: 18876 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
head_stylePAN NO. 2
head_height0.072 INCHES MINIMUM AND 0.082 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.256 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN
thread_length1.750 INCHES MINIMUM IN
screw_materialSTEEL
fastener_length2.500 INCHES NOMINAL IN
thread_directionRIGHT-HAND
internal_drive_styleSLOT
nominal_thread_diameter0.138 INCHES IN
screw_surface_treatmentCHROMATE ZINC
thread_quantity_per_inch32
NSN5305-00-633-0697
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 9011706 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.072 INCHES MINIMUM AND 0.082 INCHES MAXIMUM IN
•
SCREW SURFACE TREATMENT: CHROMATE ZINC
•
FASTENER LENGTH: 2.500 INCHES NOMINAL IN
•
THREAD LENGTH: 1.750 INCHES MINIMUM IN
•
NOMINAL THREAD DIAMETER: 0.138 INCHES IN
•
HEAD STYLE: PAN NO. 2
•
THREAD DIRECTION: RIGHT-HAND
•
SCREW MATERIAL: STEEL
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.072 INCHES MINIMUM AND 0.082 INCHES MAXIMUM IN
SCREW SURFACE TREATMENTCHROMATE ZINC
FASTENER LENGTH2.500 INCHES NOMINAL IN
THREAD LENGTH1.750 INCHES MINIMUM IN
NOMINAL THREAD DIAMETER0.138 INCHES IN
HEAD STYLEPAN NO. 2
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALSTEEL
INTERNAL DRIVE STYLESLOT
THREAD CLASS2A A
SUBSTITUTES & CROSS-REFERENCES 3
T221163-54Reference document
Same NSN cross-reference
Reference document — Secondary reference
90276D161Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
FF-S-92Reference document
Same NSN cross-reference
Reference document — Identification reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 9011706?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9011706?
9011706 is a PUNCH,HAND.
What parts can replace 9011706?
There are 3 known substitutes for 9011706: T221163-54, 90276D161, FF-S-92. Substitute compatibility should be verified for your specific system.
What is the NSN for 9011706?
9011706 is cataloged in the U.S. Government catalog under NSN 5305-00-633-0697. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9011706