PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 8WEBTXS(ZINC)
8WEBTXS(ZINC) ✓ Verified by PartsTable
— · HOSE FITTING
WHAT YOU NEED TO KNOW
PTFE tape on tapered threads (NPT/BSPT) JIC/AN flare connections seal metal-to-metal — no tape
NPT != BSPT — look identical, NOT interchangeable
PRODUCT OVERVIEW

The 8WEBTXS(ZINC) is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4730-01-142-7878, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8WEBTXS(ZINC)
NSN: 4730-01-142-7878
FSC: 4730
CAGE: 98441 — PARKER HANNIFIN CORP DBA PNEUTRONICS DIV STRATOFLEX PRODUCTS DIVISION (USA)
SPECIFICATIONS
Part Number8WEBTXS(ZINC)
NSN4730-01-142-7878
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: 8WEBTXS(ZINC) · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SPECIFICATION/STANDARD DATA: 96906-MS51507 GOVERNMENT STANDARD
•
SURFACE TREATMENT: ZINC OVERALL
•
FURNISHED ITEMS AND QUANTITY: 1 LOCKNUT AND 2 TUBE COUPLING NUT W/SLEEVE
•
THREAD SERIES DESIGNATOR: UNF FIRST END BULKHEAD
•
NOMINAL THREAD SIZE: 0.750 INCHES ALL ENDS IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-Z-325,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
SPECIFICATION/STANDARD DATA96906-MS51507 GOVERNMENT STANDARD
SURFACE TREATMENTZINC OVERALL
FURNISHED ITEMS AND QUANTITY1 LOCKNUT AND 2 TUBE COUPLING NUT W/SLEEVE
THREAD SERIES DESIGNATORUNF FIRST END BULKHEAD
NOMINAL THREAD SIZE0.750 INCHES ALL ENDS IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-Z-325,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD SERIES DESIGNATORUNF ALL ENDS
NOMINAL THREAD SIZE0.750 INCHES FIRST END BULKHEAD IN
NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED0.500 INCHES ALL ENDS IN
OPERATING PRESSURE3000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
3833525Interchangeable
interchangeable cross-reference
interchangeable
C5525X8Interchangeable
interchangeable cross-reference
interchangeable
8WEBTXSInterchangeable
Same NIIN cross-reference
interchangeable
MS51507A8ZInterchangeable
Same NIIN cross-reference
interchangeable
MIL-DTL-18866Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 8WEBTXS(ZINC)?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8WEBTXS(ZINC)?
8WEBTXS(ZINC) is a 8WEBTXS(ZINC).
What parts can replace 8WEBTXS(ZINC)?
There are 5 known substitutes for 8WEBTXS(ZINC): 3833525, C5525X8, 8WEBTXS and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 8WEBTXS(ZINC)?
8WEBTXS(ZINC) is cataloged in the Federal Logistics Information System (FLIS) under NSN 4730-01-142-7878. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8WEBTXS(ZINC)

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026