PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 8WEBTXS
8WEBTXS ✓ Verified by PartsTable
— · HOSE FITTING
WHAT YOU NEED TO KNOW
PTFE tape on tapered threads (NPT/BSPT) JIC/AN flare connections seal metal-to-metal — no tape
NPT != BSPT — look identical, NOT interchangeable
PRODUCT OVERVIEW

The ADAPTER,STRAIGHT,TUBE TO BOSS is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, flow_angle: 90.0 DEGREES, leg_length: 2.110 INCHES NOMINAL FIRST END BULKHEAD IN, seat_angle: 37.0 DEGREES ALL ENDS, thread_class: 2A FIRST END BULKHEAD A, connection_type: THREADED EXTERNAL TUBE FIRST END BULKHEAD. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4730-00-274-4601, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8WEBTXS
NSN: 4730-00-274-4601
FSC: 4730
CAGE: 98441 — PARKER HANNIFIN CORP DBA PNEUTRONICS DIV STRATOFLEX PRODUCTS DIVISION (USA)
SPECIFICATIONS
materialSTEEL OVERALL
flow_angle90.0 DEGREES
leg_length2.110 INCHES NOMINAL FIRST END BULKHEAD IN
seat_angle37.0 DEGREES ALL ENDS
thread_class2A FIRST END BULKHEAD A
connection_typeTHREADED EXTERNAL TUBE FIRST END BULKHEAD
connection_styleFLARED (TUBE) ALL ENDS
surface_treatmentZINC OVERALL
operating_pressure3000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
nominal_thread_size0.750 INCHES FIRST END BULKHEAD IN
media_for_which_designedHYDRAULIC FLUID SINGLE RESPONSE
thread_series_designatorUNF ALL ENDS
NSN4730-00-274-4601
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: 8WEBTXS · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 25
677540Interchangeable
interchangeable cross-reference
interchangeable
16458Interchangeable
interchangeable cross-reference
interchangeable
LS367-2Interchangeable
interchangeable cross-reference
interchangeable
QQ-A-200/11Interchangeable
interchangeable cross-reference
interchangeable
AMS-QQ-A-200/11Interchangeable
interchangeable cross-reference
interchangeable
G9818PC125Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 8WEBTXS?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8WEBTXS?
8WEBTXS is a ADAPTER,STRAIGHT,TUBE TO BOSS.
What parts can replace 8WEBTXS?
There are 25 known substitutes for 8WEBTXS: 677540, 16458, LS367-2 and 22 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 8WEBTXS?
8WEBTXS is cataloged in the Federal Logistics Information System (FLIS) under NSN 4730-00-274-4601. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8WEBTXS

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026