PartsTable / O-RING / 890010
890010
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The HOSE ASSEMBLY,METALLIC is a the manufacturer industrial component. Key specifications include material: PLASTIC, unit_package_type: BOX, unit_package_quantity: 36, part_name_assigned_by_controlling_agency: DRAPE SURGICAL PLASTIC TRANSPARENT STERILE DISP HEAT RESIST 36S. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-021-3625, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
890010
NSN: 5331-00-021-3625 FSC: 5331 — O-RINGCAGE: 54192 — HOPE IMAGING CORPORATION (USA)
SPECIFICATIONS
material PLASTIC special_features TRANSPARENT,STERILE,DISPOSABLE,HEAT RESISTANT,USED WITH OR WITHOUT OBSERVER ARMS,ROOM FOR CAMERA ATTACHMENTS AND OTHER EQUIPMENT unit_package_type BOX unit_package_quantity 36 part_name_assigned_by_controlling_agency DRAPE SURGICAL PLASTIC TRANSPARENT STERILE DISP HEAT RESIST 36S NSN 5331-00-021-3625
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 890010
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• ELONGATION PERCENTAGE: 125 MAXIMUM
• OUTSIDE DIAMETER: 4.193 INCHES NOMINAL IN
• CENTER HOLE DIAMETER: 3.972 INCHES MINIMUM AND 4.002 INCHES MAXIMUM IN
• MATERIAL: RUBBER SILICONE CLASS Q
• HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL
• CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
• TEMP RATING: -85.0 FAHRENHEIT AND 401.0 FAHRENHEIT DEGF
TECHNICAL CHARACTERISTICS (FLIS)
ELONGATION PERCENTAGE 125 MAXIMUM OUTSIDE DIAMETER 4.193 INCHES NOMINAL IN CENTER HOLE DIAMETER 3.972 INCHES MINIMUM AND 4.002 INCHES MAXIMUM IN MATERIAL RUBBER SILICONE CLASS Q HARDNESS RATING 70.0 SHORE DUROMETER A NOMINAL CROSS-SECTIONAL HEIGHT 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN TEMP RATING -85.0 FAHRENHEIT AND 401.0 FAHRENHEIT DEGF
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
890-010 Interchangeable interchangeable cross-reference
interchangeable
800126 Interchangeable interchangeable cross-reference
interchangeable
76887F01 Interchangeable interchangeable cross-reference
interchangeable
S12183 Interchangeable Same NIIN cross-reference
interchangeable
1PS19 Interchangeable Same NIIN cross-reference
interchangeable
SAE-AS3582 Interchangeable Same NIIN cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 890010?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 890010?
890010 is a HOSE ASSEMBLY,METALLIC.
What parts can replace 890010?
There are 10 known substitutes for 890010: 890-010, 800126, 76887F01 and 7 more. Substitute compatibility should be verified for your specific system.
Is 890010 still available?
890010 is currently cancelled.