PartsTable / O-RING / S12183
S12183
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SILICONE CLASS Q, temp_rating: -85.0 FAHRENHEIT AND 401.0 FAHRENHEIT DEGF, hardness_rating: 70.0 SHORE DUROMETER A NOMINAL, outside_diameter: 4.193 INCHES NOMINAL IN, center_hole_diameter: 3.972 INCHES MINIMUM AND 4.002 INCHES MAXIMUM IN, elongation_percentage: 125 MAXIMUM. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-021-3625, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
S12183
NSN: 5331-00-021-3625 FSC: 5331 — O-RINGCAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
material RUBBER SILICONE CLASS Q temp_rating -85.0 FAHRENHEIT AND 401.0 FAHRENHEIT DEGF hardness_rating 70.0 SHORE DUROMETER A NOMINAL outside_diameter 4.193 INCHES NOMINAL IN center_hole_diameter 3.972 INCHES MINIMUM AND 4.002 INCHES MAXIMUM IN elongation_percentage 125 MAXIMUM cross-sectional_height 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN NSN 5331-00-021-3625
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: S12183
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• ELONGATION PERCENTAGE: 125 MAXIMUM
• OUTSIDE DIAMETER: 4.193 INCHES NOMINAL IN
• CENTER HOLE DIAMETER: 3.972 INCHES MINIMUM AND 4.002 INCHES MAXIMUM IN
• MATERIAL: RUBBER SILICONE CLASS Q
• HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL
• CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
• TEMP RATING: -85.0 FAHRENHEIT AND 401.0 FAHRENHEIT DEGF
TECHNICAL CHARACTERISTICS (FLIS)
ELONGATION PERCENTAGE 125 MAXIMUM OUTSIDE DIAMETER 4.193 INCHES NOMINAL IN CENTER HOLE DIAMETER 3.972 INCHES MINIMUM AND 4.002 INCHES MAXIMUM IN MATERIAL RUBBER SILICONE CLASS Q HARDNESS RATING 70.0 SHORE DUROMETER A NOMINAL CROSS-SECTIONAL HEIGHT 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN TEMP RATING -85.0 FAHRENHEIT AND 401.0 FAHRENHEIT DEGF
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
890-010 Interchangeable interchangeable cross-reference
interchangeable
800126 Interchangeable interchangeable cross-reference
interchangeable
76887F01 Interchangeable interchangeable cross-reference
interchangeable
1PS19 Interchangeable Same NIIN cross-reference
interchangeable
SAE-AS3582 Interchangeable Same NIIN cross-reference
interchangeable
418048-155 Interchangeable Same NIIN cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy S12183?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S12183?
S12183 is a O-RING.
What parts can replace S12183?
There are 9 known substitutes for S12183: 890-010, 800126, 76887F01 and 6 more. Substitute compatibility should be verified for your specific system.
Is S12183 still available?
S12183 is currently cancelled.