PartsTable
Technical Data Sheet
PartsTable / O-RING / 89-0010
89-0010 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The HOSE ASSEMBLY,METALLIC is a the manufacturer industrial component. Key specifications include material: PLASTIC, unit_package_type: BOX, unit_package_quantity: 36, part_name_assigned_by_controlling_agency: DRAPE SURGICAL PLASTIC TRANSPARENT STERILE DISP HEAT RESIST 36S. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-021-3625, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
89-0010
NSN: 5331-00-021-3625
FSC: 5331 — O-RING
CAGE: 54192 — HOPE IMAGING CORPORATION (USA)
SPECIFICATIONS
materialPLASTIC
special_featuresTRANSPARENT,STERILE,DISPOSABLE,HEAT RESISTANT,USED WITH OR WITHOUT OBSERVER ARMS,ROOM FOR CAMERA ATTACHMENTS AND OTHER EQUIPMENT
unit_package_typeBOX
unit_package_quantity36
part_name_assigned_by_controlling_agencyDRAPE SURGICAL PLASTIC TRANSPARENT STERILE DISP HEAT RESIST 36S
NSN5331-00-021-3625
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 89-0010 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ELONGATION PERCENTAGE: 125 MAXIMUM
•
OUTSIDE DIAMETER: 4.193 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 3.972 INCHES MINIMUM AND 4.002 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SILICONE CLASS Q
•
HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
•
TEMP RATING: -85.0 FAHRENHEIT AND 401.0 FAHRENHEIT DEGF
TECHNICAL CHARACTERISTICS (FLIS)
ELONGATION PERCENTAGE125 MAXIMUM
OUTSIDE DIAMETER4.193 INCHES NOMINAL IN
CENTER HOLE DIAMETER3.972 INCHES MINIMUM AND 4.002 INCHES MAXIMUM IN
MATERIALRUBBER SILICONE CLASS Q
HARDNESS RATING70.0 SHORE DUROMETER A NOMINAL
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
TEMP RATING-85.0 FAHRENHEIT AND 401.0 FAHRENHEIT DEGF
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
890-010Interchangeable
interchangeable cross-reference
interchangeable
800126Interchangeable
interchangeable cross-reference
interchangeable
76887F01Interchangeable
interchangeable cross-reference
interchangeable
S12183Interchangeable
Same NIIN cross-reference
interchangeable
1PS19Interchangeable
Same NIIN cross-reference
interchangeable
SAE-AS3582Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 89-0010?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 89-0010?
89-0010 is a HOSE ASSEMBLY,METALLIC.
What parts can replace 89-0010?
There are 10 known substitutes for 89-0010: 890-010, 800126, 76887F01 and 7 more. Substitute compatibility should be verified for your specific system.
Is 89-0010 still available?
89-0010 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 89-0010

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026