PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 88AX100
88AX100 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: RUBBER SEALING ELEMENT, case_style: SQUARE, seal_width: 0.469 INCHES NOMINAL IN, temp_rating: 300.0 FAHRENHEIT DEGF, outside_diameter: 4.506 INCHES NOMINAL IN, attachment_method: CEMENTED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-107-1014, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
88AX100
NSN: 5330-00-107-1014
FSC: 5330
CAGE: 89619 — MACK TRUCKS, INC. DBA MACUNGIE OPERATIONS DIV LEHIGH VALLEY OPERATIONS (USA)
SPECIFICATIONS
materialRUBBER SEALING ELEMENT
case_styleSQUARE
seal_width0.469 INCHES NOMINAL IN
temp_rating300.0 FAHRENHEIT DEGF
outside_diameter4.506 INCHES NOMINAL IN
attachment_methodCEMENTED
surface_treatmentPLASTIC CASE
housing_bore_diameter3.811 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter3.125 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed2000 FEET PER MINUTE FT
NSN5330-00-107-1014
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 88AX100 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEALING ELEMENT STYLE: ANGULAR
•
TEMP RATING: 300.0 FAHRENHEIT DEGF
•
MATERIAL: STEEL CASE
•
OUTSIDE DIAMETER: 4.506 INCHES NOMINAL IN
•
SEAL WIDTH: 0.469 INCHES NOMINAL IN
•
CASE STYLE: SQUARE
•
SURFACE TREATMENT: PLASTIC CASE
TECHNICAL CHARACTERISTICS (FLIS)
SEALING ELEMENT STYLEANGULAR
TEMP RATING300.0 FAHRENHEIT DEGF
MATERIALSTEEL CASE
MATERIALRUBBER SEALING ELEMENT
OUTSIDE DIAMETER4.506 INCHES NOMINAL IN
SEAL WIDTH0.469 INCHES NOMINAL IN
CASE STYLESQUARE
SURFACE TREATMENTPLASTIC CASE
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
ATTACHMENT METHODCEMENTED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
455145Interchangeable
interchangeable cross-reference
interchangeable
800232Interchangeable
interchangeable cross-reference
interchangeable
31269Interchangeable
interchangeable cross-reference
interchangeable
7-31269Interchangeable
interchangeable cross-reference
interchangeable
0100100Interchangeable
interchangeable cross-reference
interchangeable
312-0069Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 88AX100?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 88AX100?
88AX100 is a SEAL,PLAIN ENCASED.
What parts can replace 88AX100?
There are 21 known substitutes for 88AX100: 455145, 800232, 31269 and 18 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 88AX100?
88AX100 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-107-1014. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 88AX100

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026