PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 455145
455145 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BOLT,ASSEMBLED WASHER is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1020 OVERALL, head_style: HEXAGON, head_height: 0.208 INCHES MINIMUM AND 0.230 INCHES MAXIMUM IN, thread_class: 2A A, thread_length: 2.500 INCHES MAXIMUM IN, fastener_length: 2.500 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-107-1014, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
455145
NSN: 5330-00-107-1014
FSC: 5330
CAGE: 76680 — FEDERAL-MOGUL CORP CHASSIS PRODUCTS DIV (USA)
SPECIFICATIONS
materialSTEEL COMP 1020 OVERALL
head_styleHEXAGON
head_height0.208 INCHES MINIMUM AND 0.230 INCHES MAXIMUM IN
thread_class2A A
thread_length2.500 INCHES MAXIMUM IN
fastener_length2.500 INCHES NOMINAL IN
washer_quantity1
thread_directionRIGHT-HAND
surface_treatmentCADMIUM OR ZINC OVERALL
width_between_flats0.489 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
nominal_thread_diameter0.312 INCHES IN
thread_quantity_per_inch18
NSN5330-00-107-1014
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 455145 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEALING ELEMENT STYLE: ANGULAR
•
TEMP RATING: 300.0 FAHRENHEIT DEGF
•
MATERIAL: STEEL CASE
•
OUTSIDE DIAMETER: 4.506 INCHES NOMINAL IN
•
SEAL WIDTH: 0.469 INCHES NOMINAL IN
•
CASE STYLE: SQUARE
•
SURFACE TREATMENT: PLASTIC CASE
TECHNICAL CHARACTERISTICS (FLIS)
SEALING ELEMENT STYLEANGULAR
TEMP RATING300.0 FAHRENHEIT DEGF
MATERIALSTEEL CASE
MATERIALRUBBER SEALING ELEMENT
OUTSIDE DIAMETER4.506 INCHES NOMINAL IN
SEAL WIDTH0.469 INCHES NOMINAL IN
CASE STYLESQUARE
SURFACE TREATMENTPLASTIC CASE
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
ATTACHMENT METHODCEMENTED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
455145Interchangeable
interchangeable cross-reference
interchangeable
800232Interchangeable
interchangeable cross-reference
interchangeable
31269Interchangeable
interchangeable cross-reference
interchangeable
7-31269Interchangeable
interchangeable cross-reference
interchangeable
0100100Interchangeable
interchangeable cross-reference
interchangeable
312-0069Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 455145?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 455145?
455145 is a BOLT,ASSEMBLED WASHER.
What parts can replace 455145?
There are 22 known substitutes for 455145: 455145, 800232, 31269 and 19 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 455145?
455145 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-107-1014. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 455145

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026