PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 8741800
8741800 ✓ Verified by PartsTable
— · BALL BEARING
WHAT YOU NEED TO KNOW
2RS = sealed for life, ZZ = shielded re-greaseable ABEC grade: higher = tighter tolerance
ABEC-1 standard, ABEC-7+ for precision spindles
PRODUCT OVERVIEW

The BEARING,PLAIN,ROD END is a the manufacturer industrial component. Key specifications include material: CHROMIUM INNER MEMBER, shank_style: INTERNALLY THREADED W/BEAD AND WRENCH FLATS, bore_diameter: 0.3735 INCHES MINIMUM AND 0.3775 INCHES MAXIMUM IN, overall_length: 2.3020 INCHES MINIMUM AND 2.3220 INCHES MAXIMUM IN, special_features: USED ON 2350-01-110-4660, style_designator: BALL TYPE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3120-01-131-0153, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8741800
NSN: 3120-01-131-0153
FSC: 3120
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialCHROMIUM INNER MEMBER
shank_styleINTERNALLY THREADED W/BEAD AND WRENCH FLATS
bore_diameter0.3735 INCHES MINIMUM AND 0.3775 INCHES MAXIMUM IN
overall_length2.3020 INCHES MINIMUM AND 2.3220 INCHES MAXIMUM IN
special_featuresUSED ON 2350-01-110-4660
style_designatorBALL TYPE
inner_member_width0.5930 INCHES NOMINAL IN
outer_member_width0.5490 INCHES NOMINAL IN
shank_thread_length0.5300 INCHES MINIMUM AND 0.6240 INCHES MAXIMUM IN
outer_member_outside_diameter1.1250 INCHES NOMINAL IN
shank_width_across_wrench_flats0.5520 INCHES MINIMUM AND 0.5720 INCHES MAXIMUM IN
bore_center_to_shank_end_distance1.7400 INCHES MINIMUM AND 1.7600 INCHES MAXIMUM IN
NSN3120-01-131-0153
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: 8741800 · OEM ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK WIDTH ACROSS WRENCH FLATS: 0.5520 INCHES MINIMUM AND 0.5720 INCHES MAXIMUM IN
•
INNER MEMBER WIDTH: 0.5930 INCHES NOMINAL IN
•
MATERIAL: CHROMIUM INNER MEMBER
•
STYLE DESIGNATOR: BALL TYPE
•
BORE DIAMETER: 0.3735 INCHES MINIMUM AND 0.3775 INCHES MAXIMUM IN
•
BORE CENTER TO SHANK END DISTANCE: 1.7400 INCHES MINIMUM AND 1.7600 INCHES MAXIMUM IN
•
OUTER MEMBER WIDTH: 0.5490 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
SHANK WIDTH ACROSS WRENCH FLATS0.5520 INCHES MINIMUM AND 0.5720 INCHES MAXIMUM IN
INNER MEMBER WIDTH0.5930 INCHES NOMINAL IN
MATERIALCHROMIUM INNER MEMBER
STYLE DESIGNATORBALL TYPE
BORE DIAMETER0.3735 INCHES MINIMUM AND 0.3775 INCHES MAXIMUM IN
SPECIAL FEATURESUSED ON 2350-01-110-4660
BORE CENTER TO SHANK END DISTANCE1.7400 INCHES MINIMUM AND 1.7600 INCHES MAXIMUM IN
OUTER MEMBER WIDTH0.5490 INCHES NOMINAL IN
OVERALL LENGTH2.3020 INCHES MINIMUM AND 2.3220 INCHES MAXIMUM IN
SHANK THREAD LENGTH0.5300 INCHES MINIMUM AND 0.6240 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
F45-19DInterchangeable
interchangeable cross-reference
interchangeable
3120002272384Interchangeable
interchangeable cross-reference
interchangeable
1662Interchangeable
interchangeable cross-reference
interchangeable
3120003376948Interchangeable
interchangeable cross-reference
interchangeable
8395793Interchangeable
interchangeable cross-reference
interchangeable
3120006929024Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 8741800?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8741800?
8741800 is a BEARING,PLAIN,ROD END.
What parts can replace 8741800?
There are 8 known substitutes for 8741800: F45-19D, 3120002272384, 1662 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 8741800?
8741800 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3120-01-131-0153. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8741800

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026