PartsTable
Technical Data Sheet
Download PDF

87401 — SPRING,HELICAL,EXTENSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

87401: SPRING,HELICAL,EXTENSION.

The SPRING,HELICAL,EXTENSION is a the manufacturer industrial component. Key specifications include special_features: SPRING DEFLECTION RATE:NOT RATED. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-127-7204, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
87401
NSN: 5331-00-127-7204
NIINs: 001277204, 004484102
FSC: 5331 — O-ring
CAGE: 63722 — AFP IMAGING CORP (USA)
SPECIFICATIONS
special_featuresSPRING DEFLECTION RATE:NOT RATED
NSN5331-00-127-7204
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 87401 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -70.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
•
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 1.051 INCHES MINIMUM AND 1.081 INCHES MAXIMUM IN
•
HARDNESS RATING: 80.0 SHORE DUROMETER A NOMINAL
•
CENTER HOLE DIAMETER: 0.917 INCHES MINIMUM AND 0.935 INCHES MAXIMUM IN
•
MATERIAL: RUBBER ETHYLENE-PROPYLENE CLASS EPM
TECHNICAL CHARACTERISTICS
TEMP RATING-70.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
OUTSIDE DIAMETER1.051 INCHES MINIMUM AND 1.081 INCHES MAXIMUM IN
HARDNESS RATING80.0 SHORE DUROMETER A NOMINAL
CENTER HOLE DIAMETER0.917 INCHES MINIMUM AND 0.935 INCHES MAXIMUM IN
MATERIALRUBBER ETHYLENE-PROPYLENE CLASS EPM
SUBSTITUTES & CROSS-REFERENCES 9
2-021E540-80Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
HJE03287Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
45819Reference document
Same NSN cross-reference
Reference document — Secondary reference
021E540-8Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
8256-32Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
2-021-E798-70Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 87401?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 87401?
87401 is a SPRING,HELICAL,EXTENSION.
What parts can replace 87401?
There are 9 known substitutes for 87401: 2-021E540-80, HJE03287, 45819 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 87401?
87401 is cataloged in the U.S. Government catalog under NSN 5331-00-127-7204. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 87401