2-021E540-80 — O-RING

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

2-021E540-80: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER ETHYLENE-PROPYLENE CLASS EPM, temp_rating: -70.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF, hardness_rating: 80.0 SHORE DUROMETER A NOMINAL, outside_diameter: 1.051 INCHES MINIMUM AND 1.081 INCHES MAXIMUM IN, center_hole_diameter: 0.917 INCHES MINIMUM AND 0.935 INCHES MAXIMUM IN, cross-sectional_height: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-127-7204, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

2-021E540-80

NSN: 5331-00-127-7204
FSC: 5331 — O-ring
CAGE: 02697 — PARKER-HANNIFIN CORP DIV O-RING DIVISION (USA)

SPECIFICATIONS

material	RUBBER ETHYLENE-PROPYLENE CLASS EPM
temp_rating	-70.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
hardness_rating	80.0 SHORE DUROMETER A NOMINAL
outside_diameter	1.051 INCHES MINIMUM AND 1.081 INCHES MAXIMUM IN
center_hole_diameter	0.917 INCHES MINIMUM AND 0.935 INCHES MAXIMUM IN
cross-sectional_height	0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
NSN	5331-00-127-7204

COMPONENT DIAGRAM

KEY FEATURES

•

TEMP RATING: -70.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF

•

CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN

•

OUTSIDE DIAMETER: 1.051 INCHES MINIMUM AND 1.081 INCHES MAXIMUM IN

•

HARDNESS RATING: 80.0 SHORE DUROMETER A NOMINAL

•

CENTER HOLE DIAMETER: 0.917 INCHES MINIMUM AND 0.935 INCHES MAXIMUM IN

•

MATERIAL: RUBBER ETHYLENE-PROPYLENE CLASS EPM

TECHNICAL CHARACTERISTICS

TEMP RATING	-70.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT	0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
OUTSIDE DIAMETER	1.051 INCHES MINIMUM AND 1.081 INCHES MAXIMUM IN
HARDNESS RATING	80.0 SHORE DUROMETER A NOMINAL
CENTER HOLE DIAMETER	0.917 INCHES MINIMUM AND 0.935 INCHES MAXIMUM IN
MATERIAL	RUBBER ETHYLENE-PROPYLENE CLASS EPM

SUBSTITUTES & CROSS-REFERENCES 9

HJE03287Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

45819Reference document

Same NSN cross-reference

Reference document — Secondary reference

021E540-8Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

8256-32Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

2-021-E798-70Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

ARP568-021E540- 8Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy 2-021E540-80?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 2-021E540-80?

2-021E540-80 is a O-RING.

What parts can replace 2-021E540-80?

There are 9 known substitutes for 2-021E540-80: HJE03287, 45819, 021E540-8 and 6 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 2-021E540-80?

2-021E540-80 is cataloged in the U.S. Government catalog under NSN 5331-00-127-7204. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

2-021E540-80 — O-RING

Request a Quote — 2-021E540-80