PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 86707-01
86707-01 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The NUT,PLAIN,HEXAGON is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: HEXAGON, nut_height: 0.172 INCHES MINIMUM AND 0.203 INCHES MAXIMUM IN, thread_class: 3B, thread_series: UNIFIED NATIONAL COARSE (UNC), thread_direction: RIGHT-HAND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-026-9061, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
86707-01
NSN: 5310-00-026-9061
FSC: 5310
CAGE: 35351 — GE AVIATION SYSTEMS LLC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleHEXAGON
nut_height0.172 INCHES MINIMUM AND 0.203 INCHES MAXIMUM IN
thread_class3B
thread_seriesUNIFIED NATIONAL COARSE (UNC)
thread_directionRIGHT-HAND
width_across_flats0.180 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN
nominal_thread_size0.138 INCHES IN
bearing_surface_typeCHAMFERED OR WASHER FACED
thread_quantity_per_inch32
part_name_assigned_by_controlling_agencyNAVY SPECIAL PROJECT
NSN5310-00-026-9061
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 86707-01 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NUT STYLE: HEXAGON
•
NOMINAL THREAD SIZE: 0.138 INCHES IN
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
WIDTH ACROSS FLATS: 0.180 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN
•
BEARING SURFACE TYPE: CHAMFERED OR WASHER FACED
•
NUT HEIGHT: 0.172 INCHES MINIMUM AND 0.203 INCHES MAXIMUM IN
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS (FLIS)
NUT STYLEHEXAGON
NOMINAL THREAD SIZE0.138 INCHES IN
PART NAME ASSIGNED BY CONTROLLING AGENCYNAVY SPECIAL PROJECT
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
WIDTH ACROSS FLATS0.180 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN
BEARING SURFACE TYPECHAMFERED OR WASHER FACED
NUT HEIGHT0.172 INCHES MINIMUM AND 0.203 INCHES MAXIMUM IN
THREAD DIRECTIONRIGHT-HAND
THREAD CLASS3B
THREAD QUANTITY PER INCH32
VERIFIED SUBSTITUTES & CROSS-REFERENCES 1
86707Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 86707-01?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 86707-01?
86707-01 is a NUT,PLAIN,HEXAGON.
What parts can replace 86707-01?
There is 1 known substitute for 86707-01: 86707. Substitute compatibility should be verified for your specific system.
What is the NSN for 86707-01?
86707-01 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-026-9061. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 86707-01

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026