PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 86707
86707 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The NUT,PLAIN,HEXAGON is a the manufacturer industrial component. Key specifications include phase: SINGLE INPUT, duty_cycle: CONTINUOUS, power_rating: 0.0250 HORSEPOWER OUTPUT, winding_type: SYNCHRONOUS, overall_width: 5.000 INCHES IN, cooling_method: NATURAL CONVECTION VENTILATED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-026-9061, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
86707
NSN: 5310-00-026-9061
FSC: 5310
CAGE: 35351 — GE AVIATION SYSTEMS LLC (USA)
SPECIFICATIONS
phaseSINGLE INPUT
duty_cycleCONTINUOUS
power_rating0.0250 HORSEPOWER OUTPUT
winding_typeSYNCHRONOUS
overall_width5.000 INCHES IN
cooling_methodNATURAL CONVECTION VENTILATED
overall_height4.812 INCHES IN
overall_length8.093 INCHES IN
shaft_diameter0.3750 INCHES NOMINAL IDENTICAL ENDS IN
mounting_methodFIXED BASE
enclosure_featureOPEN
features_providedHORIZONTAL MOUNTING POSITION AND VERTICAL MOUNTING POSITION
NSN5310-00-026-9061
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 86707 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NUT STYLE: HEXAGON
•
NOMINAL THREAD SIZE: 0.138 INCHES IN
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
WIDTH ACROSS FLATS: 0.180 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN
•
BEARING SURFACE TYPE: CHAMFERED OR WASHER FACED
•
NUT HEIGHT: 0.172 INCHES MINIMUM AND 0.203 INCHES MAXIMUM IN
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS (FLIS)
NUT STYLEHEXAGON
NOMINAL THREAD SIZE0.138 INCHES IN
PART NAME ASSIGNED BY CONTROLLING AGENCYNAVY SPECIAL PROJECT
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
WIDTH ACROSS FLATS0.180 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN
BEARING SURFACE TYPECHAMFERED OR WASHER FACED
NUT HEIGHT0.172 INCHES MINIMUM AND 0.203 INCHES MAXIMUM IN
THREAD DIRECTIONRIGHT-HAND
THREAD CLASS3B
THREAD QUANTITY PER INCH32
VERIFIED SUBSTITUTES & CROSS-REFERENCES 1
86707Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 86707?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 86707?
86707 is a NUT,PLAIN,HEXAGON.
What parts can replace 86707?
There is 1 known substitute for 86707: 86707. Substitute compatibility should be verified for your specific system.
What is the NSN for 86707?
86707 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-026-9061. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 86707

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026