PartsTable
Technical Data Sheet
PartsTable / O-RING / 84360PC30
84360PC30 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER ETHYLENE-PROPYLENE CLASS EPM, center_hole_diameter: 2.710 INCHES MINIMUM AND 2.758 INCHES MAXIMUM IN, cross-sectional_height: 0.136 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-460-4674, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
84360PC30
NSN: 5331-00-460-4674
FSC: 5331 — O-RING
CAGE: 76364 — MILWAUKEE VALVE CO, INC DIV MILWAUKEE VALVE COMPANY, LLC (USA)
SPECIFICATIONS
materialRUBBER ETHYLENE-PROPYLENE CLASS EPM
center_hole_diameter2.710 INCHES MINIMUM AND 2.758 INCHES MAXIMUM IN
cross-sectional_height0.136 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
NSN5331-00-460-4674
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 84360PC30 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.136 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
•
MATERIAL: RUBBER ETHYLENE-PROPYLENE CLASS EPM
•
CENTER HOLE DIAMETER: 2.710 INCHES MINIMUM AND 2.758 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.136 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
MATERIALRUBBER ETHYLENE-PROPYLENE CLASS EPM
CENTER HOLE DIAMETER2.710 INCHES MINIMUM AND 2.758 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
H467AJ001 ITEM 32Interchangeable
interchangeable cross-reference
interchangeable
810-4384536-84B30Interchangeable
interchangeable cross-reference
interchangeable
803-1385714-8-05Interchangeable
interchangeable cross-reference
interchangeable
W-S-893Interchangeable
interchangeable cross-reference
interchangeable
2CLASS1-15A120VBROWNInterchangeable
interchangeable cross-reference
interchangeable
4641Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 84360PC30?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 84360PC30?
84360PC30 is a O-RING.
What parts can replace 84360PC30?
There are 20 known substitutes for 84360PC30: H467AJ001 ITEM 32, 810-4384536-84B30, 803-1385714-8-05 and 17 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 84360PC30?
84360PC30 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-460-4674. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 84360PC30

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026