PartsTable
Technical Data Sheet
803-1385714-8-05 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER ETHYLENE-PROPYLENE CLASS EPM, center_hole_diameter: 2.710 INCHES MINIMUM AND 2.758 INCHES MAXIMUM IN, cross-sectional_height: 0.136 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-100-4717, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
803-1385714-8-05
NSN: 5331-00-100-4717
FSC: 5331 — O-RING
CAGE: 80064 — NAVAL SHIP SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialRUBBER ETHYLENE-PROPYLENE CLASS EPM
center_hole_diameter2.710 INCHES MINIMUM AND 2.758 INCHES MAXIMUM IN
cross-sectional_height0.136 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
NSN5331-00-100-4717
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 803-1385714-8-05 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS: MATERIAL WILL BE IN ACCORDANCE WITH NAVICP MECH; ACTIVITY HX QUALITY CONTROL, MANUFACTURING AND TESTING SPECIFICATIONS.
CRITICALITY CODE JUSTIFICATION: ZZZY
TECHNICAL CHARACTERISTICS (FLIS)
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICSMATERIAL WILL BE IN ACCORDANCE WITH NAVICP MECH; ACTIVITY HX QUALITY CONTROL, MANUFACTURING AND TESTING SPECIFICATIONS.
CRITICALITY CODE JUSTIFICATIONZZZY
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
65119-232Interchangeable
interchangeable cross-reference
interchangeable
AS568-232MIL-G- 22050GR2Interchangeable
interchangeable cross-reference
interchangeable
84360PC30Interchangeable
interchangeable cross-reference
interchangeable
803-1385714-8-05Interchangeable
interchangeable cross-reference
interchangeable
H467AJ001 ITEM 32Interchangeable
Same NIIN cross-reference
interchangeable
810-4384536-84B30Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 803-1385714-8-05?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 803-1385714-8-05?
803-1385714-8-05 is a O-RING.
What parts can replace 803-1385714-8-05?
There are 8 known substitutes for 803-1385714-8-05: 65119-232, AS568-232MIL-G- 22050GR2, 84360PC30 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 803-1385714-8-05?
803-1385714-8-05 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-100-4717. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 803-1385714-8-05